Thingiverse
Geekbot Mini - A Continuous Turn 9G Servo Driven Multipurpose Rover by robotgeek
by Thingiverse
Last crawled date: 4 years, 1 month ago
The Geekbot Mini is a 2 wheel drive robotic rover. Designed with the RobotGeek Centimeter Grid mounting pattern in mind, this is a cheap mobile robotic platform. Mounting points for the RoboTurret Mini and the Snapper Mini right on the top deck give this rover some options for interacting with its environment. There are also mounting points for a Sparkfun Line Follower Array and a 9G servo mount to use with the Panning Range Sensor Kit.
This project uses:
2 x Feetech FFS90R Continuous Turn Servos
2 x 60mm Wheels
1 x Geekduino Mini (not yet released, you can substitute a arduino uno/duemilanove)
1 x 9V Battery and Adapter
1 x RobotGeek IR Receiver
1 x RobotGeek Rotation Knob
1 x RobotGeek LED Driver
4 x M3x30mm F/F Standoff
4 x M3x15mm M/F Standoff
30 x M3x6mm Bolts
4 x M2x6mm Bolts
Since this robot is based on the RobotGeek Geekbot, you can use code written for the RobotGeek Geekbot with this project.
iframe src="https://myhub.autodesk360.com/ue2881035/shares/public/SHabee1QT1a327cf2b7ad89397f301684d78?mode=embed" width="640" height="480" allowfullscreen="allowfullscreen" frameborder="0"
This project uses:
2 x Feetech FFS90R Continuous Turn Servos
2 x 60mm Wheels
1 x Geekduino Mini (not yet released, you can substitute a arduino uno/duemilanove)
1 x 9V Battery and Adapter
1 x RobotGeek IR Receiver
1 x RobotGeek Rotation Knob
1 x RobotGeek LED Driver
4 x M3x30mm F/F Standoff
4 x M3x15mm M/F Standoff
30 x M3x6mm Bolts
4 x M2x6mm Bolts
Since this robot is based on the RobotGeek Geekbot, you can use code written for the RobotGeek Geekbot with this project.
iframe src="https://myhub.autodesk360.com/ue2881035/shares/public/SHabee1QT1a327cf2b7ad89397f301684d78?mode=embed" width="640" height="480" allowfullscreen="allowfullscreen" frameborder="0"