Thingiverse
Geeetech Rostock G2 / G2S LED lighting ring by qbranchrg
by Thingiverse
Last crawled date: 4 years, 7 months ago
LED lighting ring for the Geeetech Rostock G2 / G2S 3D printer
These parts can be used to add an LED lighting ring to the printer. Cable channels are built into the brackets, and a cosmetic cover is supplied that will conceal the wiring and keep it out of harm's way.
Each lighting ring will require:
3 x LED mounting strips
3 x rail mounts
3 x corner covers
The parts are designed to be a tight fit, enabling them to all snap together.
In the photos I used 12v lighting strips which were "daisy-chain" connected around the ring, and then connected directly to a spare set of 12v outputs on the 3D printer's power supply.
These parts can be used to add an LED lighting ring to the printer. Cable channels are built into the brackets, and a cosmetic cover is supplied that will conceal the wiring and keep it out of harm's way.
Each lighting ring will require:
3 x LED mounting strips
3 x rail mounts
3 x corner covers
The parts are designed to be a tight fit, enabling them to all snap together.
In the photos I used 12v lighting strips which were "daisy-chain" connected around the ring, and then connected directly to a spare set of 12v outputs on the 3D printer's power supply.