Thingiverse
Geeetech A20M/T Runout censor riser offset block for BMG extruder by Suggy
by Thingiverse
Last crawled date: 4 years, 11 months ago
If filling a BMG extruder or clone the runout censor don't line through with the extruder, this small block will line it back up.
May work with the A10M/T and A30M/T but not tested.
Holes that fix it to the metal motor mount are 3mm, the holes that fix the runout censor are 2.5mm I ran a M3 tap down mine but you hay get away with just running a M3 bolt straight in
May work with the A10M/T and A30M/T but not tested.
Holes that fix it to the metal motor mount are 3mm, the holes that fix the runout censor are 2.5mm I ran a M3 tap down mine but you hay get away with just running a M3 bolt straight in