Thingiverse
Geeetech A10T Purge Bucket Parts
by Thingiverse
Last crawled date: 5 years, 10 months ago
These three parts will help you configure the Geeetech A10T to use the Purge buck system of nozzle preperation for multi colour printing. Please don't ask me about the software settings as I'm still in the process of configuration at this point myself.
Based on an item posted on the Geeetech Face Book site by Samuel Brown.
To print the Purge/Wipe bucket, lay it flat with the two holes on the bed. I'm going to reprint in ABS I think it will last longer than PLA.
The Purge/Wipe bucket part has been tailord in length and width for the A10T's dimentions, and the X Axis cover box with switch mount has been altered in size from the original CR10S part and the switch mounting holes repositioned so that the X axis can moov far enough to allow the nozzle to pass the edge of the bed and therfore cross the wipe material mount. The aluminium Duct Tape is one way of guiding the waste off to the side and is for illustration only, I have designed and posted a small shute that works well. I'm still waiting for the silicone to arrive from ebay.
This is based on these two fileshttps://www.thingiverse.com/thing:2835282https://www.thingiverse.com/thing:3372835
I have designed a simple shute to catch the filament from the purge, I covered mine in sticky foil and the molten drops just run off.
Jan 31 2020, added another version of the shute, glue this to the wipe bracket so that it rises along with the Zaxis, there is a greater chanceof the purge going into the container.
Based on an item posted on the Geeetech Face Book site by Samuel Brown.
To print the Purge/Wipe bucket, lay it flat with the two holes on the bed. I'm going to reprint in ABS I think it will last longer than PLA.
The Purge/Wipe bucket part has been tailord in length and width for the A10T's dimentions, and the X Axis cover box with switch mount has been altered in size from the original CR10S part and the switch mounting holes repositioned so that the X axis can moov far enough to allow the nozzle to pass the edge of the bed and therfore cross the wipe material mount. The aluminium Duct Tape is one way of guiding the waste off to the side and is for illustration only, I have designed and posted a small shute that works well. I'm still waiting for the silicone to arrive from ebay.
This is based on these two fileshttps://www.thingiverse.com/thing:2835282https://www.thingiverse.com/thing:3372835
I have designed a simple shute to catch the filament from the purge, I covered mine in sticky foil and the molten drops just run off.
Jan 31 2020, added another version of the shute, glue this to the wipe bracket so that it rises along with the Zaxis, there is a greater chanceof the purge going into the container.