Geeetech A10M X-axis cover with end stop moved 10mm to the left by p-v-n

Last crawled date: 4 years ago

This is a cover for X-axis for Geetech A10M (may work for other models) which places the end stop 10mm to the left of the stock one. I made this to be able to use a purge bucket mounted in the negative X area.
To be able to properly use this, you'll need to update the following value in Configuration.h for Marlin firmware:
#define X_MIN_POS -12
Your value may be different, just subtract 10 from what you have, recompile and flash new firmware to your printer.