Thingiverse
Gears that are sized for 1" pegboard by TwoRoads
by Thingiverse
Last crawled date: 4 years, 1 month ago
In working on another project I realized that there were not gears on thingiverse to date that were sized for the standard 1" pegboard. This was really frustrating, until I tried to create my own and I realized why this was so darn difficult once I dug into it. But here they are, a set of gears that are sized to work on a pegboard. Not everything will fit perfectly with one another but there are lots of combinations that will work. The number indicates how many teeth are on the gear, which in turn determine how big it is.
There are two peg types. If your pegboard is already in a raised surface you can use the top down pegs to simply drop down through the gear and hole.
The upright version is basically a stand that will support the pegboard from underneath. Use these to give you clearance. You can either use these for all of your gears or just set them up in the corners and in the middle to make it stable then use the drop downs everywhere else.
There are two peg types. If your pegboard is already in a raised surface you can use the top down pegs to simply drop down through the gear and hole.
The upright version is basically a stand that will support the pegboard from underneath. Use these to give you clearance. You can either use these for all of your gears or just set them up in the corners and in the middle to make it stable then use the drop downs everywhere else.