Thingiverse
Gantry backplate with belt tensioning - Tronxy X5S X5SA
by Thingiverse
Last crawled date: 5 years, 10 months ago
On a coreXY printer it is crucial that the belts are equally tightened, so that the X-axis rail is completely square, with the frame.
Here's a simple solution, for the Tronxy X5S, X5SA, X5SA pro models.
You need 4 pcs M3 x 15-20mm screws
and 4 pcs M3 nuts
Print the tighteners standing with support.
Print the back plate with the back surface down.
Bonus info:
This gantry backplate is only 20 grams, with 1.5mm walls and 25% infill, including the screws. 6 grams lighter than the stock steel plate.
Also, check out my "Nifty Clamp": https://www.thingiverse.com/thing:4138158
You're welcome.
Enjoy
Here's a simple solution, for the Tronxy X5S, X5SA, X5SA pro models.
You need 4 pcs M3 x 15-20mm screws
and 4 pcs M3 nuts
Print the tighteners standing with support.
Print the back plate with the back surface down.
Bonus info:
This gantry backplate is only 20 grams, with 1.5mm walls and 25% infill, including the screws. 6 grams lighter than the stock steel plate.
Also, check out my "Nifty Clamp": https://www.thingiverse.com/thing:4138158
You're welcome.
Enjoy