Thingiverse
Galaxy S8 support for tripod mount by qymoscar
by Thingiverse
Last crawled date: 4 years, 5 months ago
During last moon eclipse, I realized that is impossible to take barely decent photos using my Samsung S8 mobile phone (in spite of its good OIS camera sensor) without a stable support.
So, as soon as I had some time to take some measures with my caliper, I designed this simple holder that can be screwed to any standard tripod thanks to a 1/4”-20 thread on its base.
I printed it using a low support density (I printed it with 4% only), everywhere but on the thread, with “Support Interface” enable to a distance of 0.4mm from both roof and floor.
So, as soon as I had some time to take some measures with my caliper, I designed this simple holder that can be screwed to any standard tripod thanks to a 1/4”-20 thread on its base.
I printed it using a low support density (I printed it with 4% only), everywhere but on the thread, with “Support Interface” enable to a distance of 0.4mm from both roof and floor.