Thingiverse
G Scale Trackside Equipment Box by Batfinks
by Thingiverse
Last crawled date: 4 years, 7 months ago
G Scale trackside equipment box to hide DCC electronic equipment. It is designed to hold a DS2 two turnout decoder, and an AR1 automatic reverse controller for track loops.
I printed out the shell in one shebang, but I included the .STL files for the walls and corners in case somebody couldn't get it to print in one piece.
The roof gets glued to the shell (I used hot glue), and that assembly simply slides over the base to cover and protect the electronic boards.
I drilled out the handle holes and bent a 0.047" piano wire to make the handles and sealed them in from the back with hot glue.
It should be somewhat rain resistant if you seal the roof to the shell, and seal the wire access hole in the bottom after running the wires.
I printed out the shell in one shebang, but I included the .STL files for the walls and corners in case somebody couldn't get it to print in one piece.
The roof gets glued to the shell (I used hot glue), and that assembly simply slides over the base to cover and protect the electronic boards.
I drilled out the handle holes and bent a 0.047" piano wire to make the handles and sealed them in from the back with hot glue.
It should be somewhat rain resistant if you seal the roof to the shell, and seal the wire access hole in the bottom after running the wires.