Thingiverse
FYSETC F6 V1.3 3D Dimension by Eliwong
by Thingiverse
Last crawled date: 4 years, 7 months ago
Product Introduction
The FYSETC F6 board is a feature rich all-in-one electronics solution for 3D printer and other CNC devices. It provides six drivers slots and supports Pololu pin compatible stepper drivers, especially the TMC drivers modules. There is no need for flying wires when using TMC2100, TMC2130 and TMC2208. and SPI,Usart and ther pin configer functions are available.
Features
Compact size: 117mm x 87mm
fully integrated all in one solution:
Arduino 2560-R3 compatible (works with Sprinter, Repetier-Firmware, Marlin out of the box)
CH340 for high speed USB serial connection
UNIVERSAL POWER:
can be used with 9V-28V for motors / heated bed
integrated high precision power regulators (DC/DC): 5V 3A Max
power input auto selector for ATmega/logic (stand alone or power from USB)
Easy DISPLAY + SD-CARD connector:
RepRapDiscount SmartController compatible pin header on board
10P FPC for Serial Touch display
2X4 PinHeader Out for SD Card moudle
Up to 6 motor drivers with easy micro-steps setup and Supports TMC driver without flying wire
10x PWM capable power mosfet outputs (1 for HotBed, 3 for Heat-End, 3 for fans, 3 for RGB LED strip)
The Hot-Bed is designed as a separate power input for maximum current
All unused pins are led out by pin headers
On Board External 2Mb SPI Flash
PCB：
4 layer
2OZ copper inner layers，1OZ out layers
High quality, High temperature FR4-TG130 PCB
Gold ENIG finishing
Hardware Reasources
Board Name
F6
License
GPL V2.0
Latest Version
V1.2
Extruders
3
Fixed Fans
5 Max
Controlled Fans
3 Max
Heaters
3 Max
Endstops
6 Max
Temp sens
4 Max
SPI
1
I2C
1
ISP
1
Serial port chip
CH340
CPU
Atmega2560
CPU Speed ( MHz )
16 Mhz
Stepper driver
6 Max
Stepper driver Type
All StepStick compatible modules
Input
Main PWR：12-24V 10A Max；BED IN：12-24V 15A Max
Output
BED OUT：15A Max ；Heater Out：5A Max
Shop
FYSETC-F6V1.3
TMC2100/2130/2208
Tech Support
Please submit any technical issue into our forum
Attachments
Schematic files
PCB files
The FYSETC F6 board is a feature rich all-in-one electronics solution for 3D printer and other CNC devices. It provides six drivers slots and supports Pololu pin compatible stepper drivers, especially the TMC drivers modules. There is no need for flying wires when using TMC2100, TMC2130 and TMC2208. and SPI,Usart and ther pin configer functions are available.
Features
Compact size: 117mm x 87mm
fully integrated all in one solution:
Arduino 2560-R3 compatible (works with Sprinter, Repetier-Firmware, Marlin out of the box)
CH340 for high speed USB serial connection
UNIVERSAL POWER:
can be used with 9V-28V for motors / heated bed
integrated high precision power regulators (DC/DC): 5V 3A Max
power input auto selector for ATmega/logic (stand alone or power from USB)
Easy DISPLAY + SD-CARD connector:
RepRapDiscount SmartController compatible pin header on board
10P FPC for Serial Touch display
2X4 PinHeader Out for SD Card moudle
Up to 6 motor drivers with easy micro-steps setup and Supports TMC driver without flying wire
10x PWM capable power mosfet outputs (1 for HotBed, 3 for Heat-End, 3 for fans, 3 for RGB LED strip)
The Hot-Bed is designed as a separate power input for maximum current
All unused pins are led out by pin headers
On Board External 2Mb SPI Flash
PCB：
4 layer
2OZ copper inner layers，1OZ out layers
High quality, High temperature FR4-TG130 PCB
Gold ENIG finishing
Hardware Reasources
Board Name
F6
License
GPL V2.0
Latest Version
V1.2
Extruders
3
Fixed Fans
5 Max
Controlled Fans
3 Max
Heaters
3 Max
Endstops
6 Max
Temp sens
4 Max
SPI
1
I2C
1
ISP
1
Serial port chip
CH340
CPU
Atmega2560
CPU Speed ( MHz )
16 Mhz
Stepper driver
6 Max
Stepper driver Type
All StepStick compatible modules
Input
Main PWR：12-24V 10A Max；BED IN：12-24V 15A Max
Output
BED OUT：15A Max ；Heater Out：5A Max
Shop
FYSETC-F6V1.3
TMC2100/2130/2208
Tech Support
Please submit any technical issue into our forum
Attachments
Schematic files
PCB files