Thingiverse
FX797T Camera Mount for Tiny Whoop by SchmidtN
by Thingiverse
Last crawled date: 3 years, 4 months ago
I made a Tiny Whoop (Blade Inductrix with on-board FPV) and didn't want to mount the camera to the SMD components with gel tape so I came to Thingiverse to look for a mount to print. There are a lot, but I bought a Rakon CNC AL and CF Upgrade Kit and two of the three mounting holes everyone else uses are covered on my frame. So, I designed a new one that only uses the front and back mounts. It is soft mountable with the bushings and screws that came with the Inductrix. The camera sits with a lot of uptilt but the EDFs are still in the shot. You can see the FPV in this YouTube video:https://www.youtube.com/watch?v=B0ObUKZJkj4
EDIT 24JUL16
Broke a couple mounts today doing some FPV racing, so I designed a V3 with tiny support tabs to make it a little stronger where the failures happened.
EDIT 24JUL16
Broke a couple mounts today doing some FPV racing, so I designed a V3 with tiny support tabs to make it a little stronger where the failures happened.
Similar models
thingiverse
free
Eachine TX04 Mount for Inductrix / Tiny Whoop by cmot17
...nt for the eachine tx04 aio camera for the inductrix / tiny whoop frames. i'm using it on a cockroach frame from newbeedrone.
thingiverse
free
Inductrix Micro Camera Mount - Another Variation by bmsweb
...ple camera mount for the inductrix / tiny whoop. this is just my variation of some of the designs already on thingiversion. enjoy
thingiverse
free
Eachine E010 - Wolfwhoop WT05 FPV Camera Mount (Tiny Whoop) by TimBolton
...a in place. thanks for looking!
amazon links for these items:eachine e010 mini drone (red)wolfwhoop wt05 micro aio 600tvl camera
thingiverse
free
Inductrix FPV Tiny Whoop case by sheridanp
...nce of the lid is 30mm and the inductrix sits 25mm in the base. if your quad is less than 55mm tall, it should fit with no issue.
thingiverse
free
Eachine EF-01 Camera Mount for Tiny Whoop by DylanFM
...20130525
i took off the camera's back plate and attached it to the mount using m2x5mm screws.
the camera angle is 15 degrees
thingiverse
free
Racing Gate for Tiny Whoop by d2000
...erse
racing gate for the inductrix tiny whoop or other tiny fpv drones.
i made a lipo battery tray for if you want to add leds.
thingiverse
free
Tiny Whoop camera mount by marcuslankenau
...ed by 3 screws, did not like them and created this one. there is no angle for the camera. used abs, pla should work fine as well.
thingiverse
free
Lunchbox tiny whoop Inductrix by ejpsx
...lunchbox tiny whoop inductrix by ejpsx
thingiverse
lunchbox tiny whoop inductrix
thingiverse
free
Tiny whoop Inductrix Case by babar121
...lds 6 batteries and the quadcopter itself. shown with hyperion fpv camera/vtx and mount http://www.thingiverse.com/thing:1532755.
thingiverse
free
Tiny Whoop/Inductrix bracket by raar
...n the bracket and secure it with a tiny rubber band. the bracket ca be placed with some glue in a nice case with other whoops ;-)
Schmidtn
thingiverse
free
Almiraj by SchmidtN
...te bunny - 3d scanhttps://www.thingiverse.com/thing:2778632
and videan42's unicorn hornhttps://www.thingiverse.com/thing:8671
thingiverse
free
Adafruit 16x2 LCD lid for ISS-Above by SchmidtN
... iss-above that fits an adafruit 16x2 lcd display. snaps into lower half of the enclosure that came with the kickstarter bundle.
thingiverse
free
Outrunner Quadcopter Motor Wrench (Lumenier RX2206) by SchmidtN
...uadcopter is dirty and your hands are sweaty. rubber band is helpful, but not necessary.
remember to take it off before you fly
thingiverse
free
Shapeoko 2 Modular Table Vice 1" by SchmidtN
...he bed).
companion to 3" clamp: http://www.thingiverse.com/thing:468536
and v-block: http://www.thingiverse.com/thing:489254
thingiverse
free
Shapeoko 2 Modular Table Vice V Block by SchmidtN
...p)
companion to 3" clamp: http://www.thingiverse.com/thing:468536
and 1" clamp: http://www.thingiverse.com/thing:478459
thingiverse
free
Shapeoko 2 Quiet Cut Spindle Speed Controller Housing by SchmidtN
...try-module
spindle speed controller (one size fits all)https://www.inventables.com/technologies/spindle-speed-controller#30417-01
thingiverse
free
Shapeoko 2 Modular Table Vice 3" by SchmidtN
...r clamp.
companion to 1" clamp: http://www.thingiverse.com/thing:478459
and v-block: http://www.thingiverse.com/thing:489254
thingiverse
free
FatShark Pilot HD V2 mount for ZMR250 Frame (V2 PDB) by SchmidtN
...cro sd card in and out without taking apart the quad after every flight. be careful with carbon fiber dust, it's conductive.
thingiverse
free
Shapeoko 2 Work Clamp by CheesyGrin
...work clamp by cheesygrin thingiverse this is remix of @schmidtn great idea and design for a modular work holder...
Fx797T
thingiverse
free
Blade Inductrix - FX797T - Support by dinizhobby
...blade inductrix - fx797t - support by dinizhobby
thingiverse
support for fx797t and blade inductrix
thingiverse
free
FX797T antenna protection by MyOwn3Dworld
... decide to put a protection on it:
two parts, an elastic and a printed clip.
you can add a band of shrink sleeve to reinforce it.
thingiverse
free
Eachine QX90 FX798T FX797T support by denisvic
... support for a fx798t or fx797t for eachine qx90. 20 degrees version.
this camera has a much better image quality than stock one.
thingiverse
free
Tiny Whoop FX797T and VA1100 Camera Housing by ccbdav
... spektrum va1100 camera.
for a more lightweight option including 110mm build info, see http://www.thingiverse.com/thing:804699.
thingiverse
free
Airwave - Micro FPV Quadcopter frame for Micro Scisky, 820 motors and FX797T by ivanwyc
...ware: some n3 nylon standoffs/nuts/screws. i use 3 x 20mm standoffs for mounting the top plate and 4 x 10mm as the landing gears.
thingiverse
free
Eachine E010 FX797T FPV 20° Camera Mount by happyharrysco1
...e current inductrix versions don't work properly on the e010 due to the positioning of components on the pcb being different.
thingiverse
free
Eachine E010 FX797T FPV 10° Camera Mount by happyharrysco1
...e this as the current inductrix versions don't work properly due to the positioning of components on the pcb being different.
thingiverse
free
Tiny Whoop FPV Antenna Protector: for Spektrum VA1100, FX797t FPV Pod, Micro Cam VTX 25mW by LukaM
...tached to camera/vtx, slide the second in place and glue both the top and bottom cross section for strength and stability.
enjoy!
thingiverse
free
Tiny Whoop FX797T and VA1100 Camera Housing Minimalistic by ccbdav
...agile, so don't scale it down unless you're sure you're comfortable with soldering.
works fine with antenna savers.
Whoop
thingiverse
free
whoop by MichaelJFPV
...whoop by michaeljfpv
thingiverse
whoop
thingiverse
free
Tiny Whoop holder for 2 whoops by d2000
...tiny whoop holder for 2 whoops by d2000
thingiverse
tiny whoop holder for 2 whoop mini drones and battery
thingiverse
free
Whoop frame by Brassekongo
...whoop frame by brassekongo
thingiverse
a tiny whoop frame
thingiverse
free
Whoop frame by Brassekongo
...whoop frame by brassekongo
thingiverse
my first whoop frame.
thingiverse
free
WHOOPS 4
...
whoops is another
big cinewhoop as addon for hyperlite tooth fairy race frame 4"
first flight https://youtu.be/xm9afwiiass
thingiverse
free
Tiny Whoop 65mm by binaryfpv
...tiny whoop 65mm by binaryfpv
thingiverse
tiny whoop 65mm
thingiverse
free
V-Tail Whoop by Mystereon
...v-tail whoop by mystereon
thingiverse
v-tail whoop .. wip
thingiverse
free
Tiny Whoop Case by 3DRCStore
...tiny whoop case by 3drcstore
thingiverse
tiny whoop case for transport.
thingiverse
free
Tiny Whoop Calibration Base
...tiny whoop calibration base
thingiverse
a base usefull to calibrate your tiny whoop
thingiverse
free
Tiny Whoop Gate by Imozeb
...tiny whoop gate by imozeb
thingiverse
custom tiny whoop gate. requires hot glue for assembly.
Tiny
turbosquid
$3
Tiny Mushroom
...squid
royalty free 3d model tiny mushroom for download as ma on turbosquid: 3d models for games, architecture, videos. (1562284)
turbosquid
$2
Tiny Tank
...osquid
royalty free 3d model tiny tank for download as blend on turbosquid: 3d models for games, architecture, videos. (1542044)
turbosquid
$3
Tiny Knife
...
royalty free 3d model tiny knife for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1358937)
3d_export
$5
Tiny house
...tiny house
3dexport
https://www.dock4all.com/
3d_export
free
Tiny Toy
...tiny toy
3dexport
turbosquid
$30
Tiny Tank
...lty free 3d model tiny tank for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1608730)
turbosquid
$20
Tiny houses
...lty free 3d model tiny house for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1642651)
turbosquid
$100
Tiny boy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Tiny Man
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Tiny House
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Camera
archibase_planet
free
Camera
...base planet
camera surveillance camera video camera
camera surveillance n090211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...hibase planet
camera security camera video camera
camera security n210515 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...se planet
camera web camera webcam
camera butterfly usb pc camera n090713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...mera
archibase planet
surveillance camera video camera camcorder
camera n011211 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera digital camera
camera canon digital n041211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera film camera phototechnique
camera n100214 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...amera
archibase planet
camera video camera camcorder
camera video n070315 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...rchibase planet
camera video camera camcorder
camera studio n101213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Camera
...ibase planet
digital camera camera phototechnique
camera canon ixus 400 n310311 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...ase planet
photocamera video camera camera
camera sony t300 black n291010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)