Fusion Cup PvP Badge

Last crawled date: 4 years, 4 months ago

Fusion Cup Badges.
There are 2 versions of this, One with the Colours sticking up (V3) and one with the body colour sticking up (V2)
If you have a multicolour printer you'll need to swap a filament or two at times so that it can print them the right colour.
In V2 you'll need to swap the black filament after its finished the black layers to be a red, then one of the blue, green or purple to be the yellow.
For V3 after the black / body colour swap those so you have the 5 colours for the top colours that stick up.
Both were printed with 0.2mm layers although if i was to print more ov V2 I'd do them in 0.1mm layers so smoother curves.
As usually there are single piece versions of both for those without a multicolour printer.
The Zip files contain the mini bases for printing these for the trophies I have designed as well.