Thingiverse
fusebox carriage mod for 1.8mm thick belts by pen25
by Thingiverse
Last crawled date: 4 years, 4 months ago
EDIT***
Added a crude picture with the belt path
EDIT***
THE ORIGINAL WAS UPDATED ON 2_28_16. HAVE MODIFIED THAT TO FIT THE 1.8MM BELTS.
PRINTED IT AND THE BELTS FIT PERFECT
the original carriage belt slots were 1.3mm wide. my belt was 1.8mm without careful modification to the original my belts wouldnt fit. i also added a little more material to beef up the bearing holders and to get the fan mount to print i modified the two ears.
Added a crude picture with the belt path
EDIT***
THE ORIGINAL WAS UPDATED ON 2_28_16. HAVE MODIFIED THAT TO FIT THE 1.8MM BELTS.
PRINTED IT AND THE BELTS FIT PERFECT
the original carriage belt slots were 1.3mm wide. my belt was 1.8mm without careful modification to the original my belts wouldnt fit. i also added a little more material to beef up the bearing holders and to get the fan mount to print i modified the two ears.