Thingiverse
Funny Humidity Meter (arduino controlled) by vilagi
by Thingiverse
Last crawled date: 4 years, 2 months ago
This text is translated by google translator, so I apologize if there is any confusion.
Hi everybody.
This is a fun thing to measure air humidity. In the chimney, the humidifier (DHT11) is connected to the controller (ARDUINO UNO) and the moisture value is changed when humidity changes.
If the humidity is below 70 percent, it will show sunshine. If the humidity rises above 70 percent it will show an umbrella. This value can be set in the code provided.
You will need to be assembled
printed parts
Arduino Uno
DH11 moisturizer
Hot Glue Gun
Modeling is not tricky, you must follow the attached pictures.
I wish lots of fun, and if there were any questions, send a message
https://www.youtube.com/watch?v=0clIiB42brE
Hi everybody.
This is a fun thing to measure air humidity. In the chimney, the humidifier (DHT11) is connected to the controller (ARDUINO UNO) and the moisture value is changed when humidity changes.
If the humidity is below 70 percent, it will show sunshine. If the humidity rises above 70 percent it will show an umbrella. This value can be set in the code provided.
You will need to be assembled
printed parts
Arduino Uno
DH11 moisturizer
Hot Glue Gun
Modeling is not tricky, you must follow the attached pictures.
I wish lots of fun, and if there were any questions, send a message
https://www.youtube.com/watch?v=0clIiB42brE