Thingiverse
Funjet Ultra 2 FPV nose for DJI HD
by Thingiverse
Last crawled date: 4 years, 3 months ago
Low drag FPV nose for Multiplex Funjet Ultra 2 designed to fit the DJI HD FPV camera. This nose also fit the regular funjet 2 and the old funjet and funjet ultra!
Cutting the nose off a funjet straight is not an easy task but I came up with a method for it and it worked out great, after the failed atempt with the black marker.
First measure the nose with calipers set to 46mm and try to hold it as straight as possible between the ribs without compressing the foam, then insert a needle into the rib on one side.
Now take a piece of string and insert a needle through it and insert the needle centered at the point of the nose so the string can swiwel around the needle.
Take the string and hold it against the needle in the rib and insert another needle throug it so its protruding less then 1 mm through the string and swiwel the string around the nose poking holes around the nose. Insert needles in the holes you poked.
I used a new razor and made a shallow slit through the laminate around the whole nose by supporting it against the needles, then I used a hacksaw blade and chopped the nose off, the laminate guides the blade. If you havent laminated the model it should work great to use some tape around where you want to cut the nose temporary just to get support and guide for the hacksaw blade.
Rotate the models 90 degrees and click on lay flat, just like in the cura pictures.
Print nose with supports everyware, 4 walls and 20% infill or more, same with the lid but it also needs a brim. Dont worry about the supports failing on the lid, it seems to sort it self after a while. Also you could set custom z-seam to move the seam where its less visible.
Before you install the lid with the camera in the nose, make sure to insert and remove the lid a few times to losen it up so it does not bind with the camera stuck inside!!!
To secure the lid to the nose I just lay a tiny bead of glue ontop of the seam after the lid is fully seated, then it easy to remove the lid if needed...
Cutting the nose off a funjet straight is not an easy task but I came up with a method for it and it worked out great, after the failed atempt with the black marker.
First measure the nose with calipers set to 46mm and try to hold it as straight as possible between the ribs without compressing the foam, then insert a needle into the rib on one side.
Now take a piece of string and insert a needle through it and insert the needle centered at the point of the nose so the string can swiwel around the needle.
Take the string and hold it against the needle in the rib and insert another needle throug it so its protruding less then 1 mm through the string and swiwel the string around the nose poking holes around the nose. Insert needles in the holes you poked.
I used a new razor and made a shallow slit through the laminate around the whole nose by supporting it against the needles, then I used a hacksaw blade and chopped the nose off, the laminate guides the blade. If you havent laminated the model it should work great to use some tape around where you want to cut the nose temporary just to get support and guide for the hacksaw blade.
Rotate the models 90 degrees and click on lay flat, just like in the cura pictures.
Print nose with supports everyware, 4 walls and 20% infill or more, same with the lid but it also needs a brim. Dont worry about the supports failing on the lid, it seems to sort it self after a while. Also you could set custom z-seam to move the seam where its less visible.
Before you install the lid with the camera in the nose, make sure to insert and remove the lid a few times to losen it up so it does not bind with the camera stuck inside!!!
To secure the lid to the nose I just lay a tiny bead of glue ontop of the seam after the lid is fully seated, then it easy to remove the lid if needed...
Similar models
thingiverse
free
Funjet Ultra 2 FPV nose Predator / Falkor MINI
...ert and remove the lid a few times to losen it up so it does not bind with the camera stuck inside!!!https://youtu.be/dqtry_tukfw
grabcad
free
Hacksaw
...hacksaw
grabcad
complete hacksaw that was designed after one i have laying around.
cg_trader
free
Hacksaw
...hacksaw
cg trader
complete hacksaw that was designed after one i have laying around.
thingiverse
free
nano drak dji fpv or vc400 nose mount
...ween the nose and mount. i use tape and hot glue to secure the dji transmitter. you can also use rubber bands between the skewers
thingiverse
free
DJI FPV Nose Spacer by AKXM2
...dji fpv nose spacer by akxm2
thingiverse
nose spacer for dji fpv goggles for flat "asian style nose :)"
thingiverse
free
Reptile Dragon DJI FPV nose by gtrick90
...reptile dragon dji fpv nose by gtrick90
thingiverse
just an initial design of dragon reptile nose for dji hd fpv
thingiverse
free
DJI FPV Camera
...dji fpv camera
thingiverse
dji fpv camera
thingiverse
free
DJI FPV cam spacer
...amera.
this allows you to fit a dji fpv system camera in standard size frames
print in tpu (sainsmart)
you need 2 for each frame.
thingiverse
free
DJI FPV camer and air unit handler for Planes
...dji fpv camer and air unit handler for planes
thingiverse
air unit and camera support frame to install dji fpv system on planes
thingiverse
free
DJI Goggle Wallmount
..."nose", but then you need a lot of support.
you can also print split 1 and 2 ant glue them together plus the nose-part.
Funjet
thingiverse
free
Funjet Canopyholder by 2beers
...funjet canopyholder by 2beers
thingiverse
this thing can cloued into the funjet canopy.
thingiverse
free
Multiplex Funjet Engine Mount by der_hage
... a lightweight version of the funjet, i designed this mounting.
the motor mount is for a small 1402 motor with 12mm hole spacing.
thingiverse
free
Funjet naca duct
...than the old version.
made to fit 50mm to 65mm diameter circular fuselage. fits all funjet versions and probebly most clones too.
thingiverse
free
RC MultiPlex Funjet - FPV Mount by andymemo
...ientation of this part is important when printing to reduce the amount of support material. i opted to print this as a tall part.
thingiverse
free
Funjet hybrid aluminium motor mount and drill jig
...enter hole and 7mm drill for the vent holes.
use something sharp to score a line around the jig and grind the shape of the mount.
thingiverse
free
Funjet FC mounts, BEC/CAP tray, and 200a ESC tray
... fc mount to the battery. this is so the ecs could be replaced if needed by sliding it out the back through the motor mount ring.
thingiverse
free
Funjet Ultra 2 FPV nose Predator / Falkor MINI
...ert and remove the lid a few times to losen it up so it does not bind with the camera stuck inside!!!https://youtu.be/dqtry_tukfw
thingiverse
free
Canopy holder, customizable (compatible to Multiplex Cularis, Easyglider, Easystar, FunJet), completely in OpenScad by HenningS
...cularis canopy, but the "mpx original" dimensions can be defined as well.
optimized to print without support structure.
3dwarehouse
free
Funjet
...funjet
3dwarehouse
funjet #funjet_epp_plane_plan
Dji
3ddd
free
Подвес DJI Zenmuse
... подвес
подвес dji zenmuse z15-5d для canon 5d mark ii/iiihttp://www.rcteam.ru/dji/zenmuse-z15-5d.html
3ddd
$1
шасси для рамы DJI S800
...еся шасси для рамы dji s800
dji s800 retractable landing skidhttp://www.rcteam.ru/dji/s800-retracting-landing-gear.html
3ddd
$1
DJI Phantom 2
... dji
450000 polys
швы корпуса могут показаться ошибкой моделинга, но это не совсем так!)
3d_ocean
$39
DJI Phantom3 Professional
...540 highly detailed model of the dji phantom3 professional quadcopter. the model is very highpoly (collapsed meshes, no modifi...
turbosquid
$1
dji osmo pocket
...
royalty free 3d model dji osmo pocket for download as blend on turbosquid: 3d models for games, architecture, videos. (1613550)
turbosquid
$98
DJI Inspire 1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
DJI Charging hub
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$39
DJI Phantom3 Professional3d model
... model
cgstudio
.max .obj - dji phantom3 professional 3d model, royalty free license available, instant download after purchase.
cg_studio
$39
DJI Inspire1 quadcopter3d model
...3d model
cgstudio
.max .obj - dji inspire1 quadcopter 3d model, royalty free license available, instant download after purchase.
3d_ocean
$39
DJI Inspire 1 quadcopter
...rtexcount: 270883 the model comes in the following formats: -max 2012 -obj (no materials), exported with blender preset includ...
Nose
3d_export
$5
By noses
...by noses
3dexport
the package includes 6 models of noses with their textures and bones ready to animate
3d_export
free
Nose Drops
...nose drops
3dexport
nose drops)
3d_export
$5
Nose 3D Model
...nose 3d model
3dexport
nose human realistic
nose 3d model annu001 79678 3dexport
turbosquid
$8
N for Nose
...bosquid
royalty free 3d model n for nose for download as max on turbosquid: 3d models for games, architecture, videos. (1693062)
turbosquid
$2
Male Nose
...lty free 3d model male nose for download as ztl, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1685205)
turbosquid
$99
Nose Man
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
nose art
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Nose Mouth
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
female nose pack
... poly )<br>*10 obj female noses ( low poly )<br>*1 ztl file of 10 female noses<br>*1 zbp female noses imm brush
3d_export
free
nose aspirator
...nose aspirator
3dexport
more info and files here:
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.
Hd
3d_export
$7
Bread hd
...bread hd
3dexport
hd for you
3ddd
$1
Cintiq24 HD
...cintiq24 hd
3ddd
cintiq24 hd
design_connected
$16
Nova HD
...nova hd
designconnected
instashade nova hd computer generated 3d model.
turbosquid
$20
Neptune HD (Suport Full HD Render)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
HD skull
...l
turbosquid
royalty free 3d model hd skull for download as on turbosquid: 3d models for games, architecture, videos. (1207058)
3d_ocean
$2
Grass HD
... the time! grass hd with 4k textures want to make grass field? of course you can! tileable support! have any problem? contact me!
3d_export
$13
angel hd
...angel hd
3dexport
beautifuul!
turbosquid
$40
EAGLE HD
...urbosquid
royalty free 3d model eagle hd for download as obj on turbosquid: 3d models for games, architecture, videos. (1172720)
turbosquid
$30
HD Spaceship
...squid
royalty free 3d model hd spaceship for download as max on turbosquid: 3d models for games, architecture, videos. (1367374)
turbosquid
$2
HD Tree
...id
royalty free 3d model hd tree for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1670118)
Ultra
3ddd
$1
ultra
...ultra
3ddd
ultra , кресло
офисное кресло руководителя, модель ultra
3ddd
$1
Стол Ultra
...стол ultra
3ddd
ogogo
стол ultra, интернет магазина ogogo обстановочка.
turbosquid
$10
ULTRA CHAIR_COMFORT
...royalty free 3d model ultra chair_comfort for download as max on turbosquid: 3d models for games, architecture, videos. (1256242)
turbosquid
$8
Ultra Bot
...urbosquid
royalty free 3d model ultra bot for download as ma on turbosquid: 3d models for games, architecture, videos. (1330752)
turbosquid
$3
Ultra Ball
...
royalty free 3d model ultra ball for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1510206)
turbosquid
$2
Ultra Greatsword
...ty free 3d model ultra greatsword for download as 3ds and fbx on turbosquid: 3d models for games, architecture, videos. (1238281)
3ddd
$1
Galaxy Ultra
... ultra
реальная модель из жизни, текстуры в архиве есть, также имеется файл для макса 2010-го
turbosquid
$12
Ultra WebCam
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Ultra Ball
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Ultra AP
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур