Thingiverse
Fully Printable Modern Desk Lamp by guppyk
by Thingiverse
Last crawled date: 3 years, 3 months ago
A simple and easy to print, yet modern and stylish desk or bedside table lamp.
To mount this to your table / office desk use my universal table clamp (Thing 4610983, which also has the right adapter to connect to the lamp, same as PartC):Table Clamp
Strictly speaking it is of course not "fully" printable. Printing LED bulbs (for whatever reason) does not seem to provide adequate results, same with power cords and a few other parts, so you will still need a few things from your hardware store / Ali / Ebay / Amazon or your depot of salvaged hardware.
You will need:A compact E14 socket (or similar, whatever is most common where you live) this is actually the (only) tricky part as it will have to fit (I had to cut off the rear part from mine to make it fit)
Four M5*20 external hex screws + nuts I have included .stls for printable M5x25mm hex screws and nuts, but would definitely recommend using steel.
An E14 (or similar) LED light bulb, preferably warm white Make sure it is small enough to fit the shade and does not get too hot to melt your print.
A power cord and plug (I got mine from an old electronic device I had to discard).
An in-line cord light switch (nice to have but basically optional). The good news, this one is printable (Thing 4610930):In-line Cord Light Switch
For the arms you have two options. Either you print them (PartH). You will need 2 of the 180 mm strips and one of the 150 mm strips. Alternatively you can simply use a 20x3 mm wooden strip. Cut two pieces of 180 mm each and one of 150 mm and drill the holes at the ends (use PartH as template).
You can print this in any color you like but PartE (the actual lamp shade) should be white or transparent.
On my Ender 3 I print all parts in PLA (all dark parts are actually carbon fiber) with 0.2 mm layer height and 75% infill (except for the shade, which is 100% and the strips, which are 30%).
Enjoy!
And remember to be extra careful when handling electrical equipment / high voltage, make sure that you know what you are doing and of course no guarantee whatsoever.
To mount this to your table / office desk use my universal table clamp (Thing 4610983, which also has the right adapter to connect to the lamp, same as PartC):Table Clamp
Strictly speaking it is of course not "fully" printable. Printing LED bulbs (for whatever reason) does not seem to provide adequate results, same with power cords and a few other parts, so you will still need a few things from your hardware store / Ali / Ebay / Amazon or your depot of salvaged hardware.
You will need:A compact E14 socket (or similar, whatever is most common where you live) this is actually the (only) tricky part as it will have to fit (I had to cut off the rear part from mine to make it fit)
Four M5*20 external hex screws + nuts I have included .stls for printable M5x25mm hex screws and nuts, but would definitely recommend using steel.
An E14 (or similar) LED light bulb, preferably warm white Make sure it is small enough to fit the shade and does not get too hot to melt your print.
A power cord and plug (I got mine from an old electronic device I had to discard).
An in-line cord light switch (nice to have but basically optional). The good news, this one is printable (Thing 4610930):In-line Cord Light Switch
For the arms you have two options. Either you print them (PartH). You will need 2 of the 180 mm strips and one of the 150 mm strips. Alternatively you can simply use a 20x3 mm wooden strip. Cut two pieces of 180 mm each and one of 150 mm and drill the holes at the ends (use PartH as template).
You can print this in any color you like but PartE (the actual lamp shade) should be white or transparent.
On my Ender 3 I print all parts in PLA (all dark parts are actually carbon fiber) with 0.2 mm layer height and 75% infill (except for the shade, which is 100% and the strips, which are 30%).
Enjoy!
And remember to be extra careful when handling electrical equipment / high voltage, make sure that you know what you are doing and of course no guarantee whatsoever.
Similar models
thingiverse
free
Table lamp by chicco73
...ld bulb holder as well as the power cord with all gold switch. you can choose your favorite color. a light bulb led is preferred.
cults
$7
MARILYN
...prox. 59 mm. height full lamp incl. hook approx. 212 mm.
for more information and other designs: http://www.sjaakvandervooren.nl
cg_trader
$10
Lampshade NATURE HEX table or pendant lamp - E27 mount 3Dprint | 3D
... pendant lamp. dimensions: a) with cover: diameter = 160 mm, height = 208 mm b) without cover : diameter = 160 mm, heigh = 158 mm
thingiverse
free
E14 Lamp shade by E-Mat
...and the shade to prevent overheating.
pla recommended. layer height 0.3mm, infill 10%. no supports.
https://youtu.be/uamjeg9zvng
thingiverse
free
Small lantern - lamp shade for e14 bulb by Ylandot
...heses pictures the electric part is not definitive, i'm in the process of selecting where to put the 3 lamp shades i made :-)
cg_trader
$6
Lamp shade for LEDs | 3D
...en bar, or your bedroom.
lamp dimensions required
11cm height and 5.5cm diamter
an stl and obj 3d printable formats are provided.
thingiverse
free
Base for folded plastic lamp shade by RoPa
...albe or somewhere else).
only use low power bulbs like led bulbs. don't use anything that generates heat or you risk a fire.
thingiverse
free
Lamp shade holder by rameerez
... the part attaches both to the shade and the body with 3 bolts and nuts (2 to attach the shade, 1 to attach the part to the body)
thingiverse
free
Lamp schade hex by Tranan
...lamp schade hex by tranan
thingiverse
a light shade for a 29 mm fiting e14 socket,
thingiverse
free
Light mount/holder for Balloon lamp by Rillion
... an led light bulb anyway for safety.
it is for the balloon lamp shade at 150% scale.
print and glue over you light source cord.
Guppyk
thingiverse
free
Radiator Humidifier by guppyk
... resin (approx. us $5) to make my prints 100% waterproof: epoxy resin.
hope you like it and if you like it please like it!
enjoy!
thingiverse
free
Try Square / Carpenter's Square by guppyk
...rint. print at 0.2 mm with 30 % infill. ideally (optional) change filament once the ruler is completetd.
hope you like it. enjoy!
thingiverse
free
Slug / Snail Barrier by guppyk
...ver, you can also use the fastener to attach a second (third, fourth...) print to get larger diameters for larger plants.
enjoy!
thingiverse
free
Bee Queen Transport Cage by guppyk
...t in some transparent color (so you can see what actually happens inside the cage) at 0.2 mm layer height and 100% infill.
enjoy!
thingiverse
free
Bee Queen Excluder by guppyk
... height. no supports or plate adhesion needed. make sure to remove any sharp edges so the bees won't hurt themselves.
enjoy!
thingiverse
free
Universal Table Clamp / Lamp Mount by guppyk
...anything to the back of the clamp with 4 m3 screws (spaced 17.5x20mm) or to the adapter with two m5 screws (spaced 20 mm).
enjoy!
thingiverse
free
Beehive Entrance Reducers - Different Sizes by guppyk
...asy print. no supports or plate adhesion needed. print in any color your bees like at 0.2 mm layer height and 100% infill.
enjoy!
thingiverse
free
Caliper Pen (Metric and Imperial) by guppyk
....12) with 50+% infill in pla (or abs, petg...). you will need to enable support for parta (for the tip).
hope you like it. enjoy!
thingiverse
free
Planter / Pot / Vase - Four Sizes by guppyk
...pe you like it, and if you like it, please like it!
should be an easy print. print with any filament, any infill, any resolution.
thingiverse
free
Key Safe / Vault / Box - Two Sizes by guppyk
...infill. use some unobtrusive color. use two 3 - 4 mm screws to mount.
hope you like it and if you like it, please like it. enjoy!
Desk
3d_ocean
$6
Desk
...desk
3docean
bureau desk desktop office plywood study table work desk writing
a desk made of plywood
3d_ocean
$8
Desk
...oom or university. it can be used as an office desk or as a teacher’s desk, for example. the layer names are self explanatory....
3d_export
$5
Desk
...desk
3dexport
desk
3d_export
$5
Desk
...desk
3dexport
desk
3d_export
$5
desk
...desk
3dexport
desk
3d_export
$5
desk
...desk
3dexport
desk
3d_export
free
desk
...desk
3dexport
desk
3d_export
free
desk
...desk
3dexport
desk
3d_export
$5
desk
...desk
3dexport
computer desk
archibase_planet
free
Desk
...rchibase planet
bureau desk writing-desk
desk giorgetti epi 51610 n231010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Fully
turbosquid
$50
Drone fully rigged
...
royalty free 3d model drone fully rigged for download as max on turbosquid: 3d models for games, architecture, videos. (1282280)
turbosquid
$12
FULLY PARAMETRIC CHAIR
...alty free 3d model fully parametric chair for download as rvt on turbosquid: 3d models for games, architecture, videos. (1280209)
turbosquid
$10
firetruck-fully-rigged
...yalty free 3d model firetruck-fully-rigged for download as ma on turbosquid: 3d models for games, architecture, videos. (1653811)
turbosquid
$6
Fully rigged character
...ty free 3d model fully rigged character for download as blend on turbosquid: 3d models for games, architecture, videos. (1486076)
turbosquid
$3
Fully Rigged shark
...ee 3d model fully rigged 3d shark model for download as blend on turbosquid: 3d models for games, architecture, videos. (1517695)
turbosquid
$75
Fully Customizable Hospital
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Fully Rigged Link
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$16
Troy W Fully Covered
...troy w fully covered
designconnected
magis troy w fully covered computer generated 3d model. designed by wanders, marcel.
cg_studio
$99
Pepe fully rigged3d model
...ully rigged3d model
cgstudio
.max - pepe fully rigged 3d model, royalty free license available, instant download after purchase.
3d_export
$60
Ankylosaur 8K - fully animated
...ankylosaur 8k - fully animated
3dexport
Lamp
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp table lamp reading lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp table lamp reading lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp table lamp reading lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp table lamp reading lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp lantern
lamp - 3d model (*.3ds) for interior 3d visualization.
3d_ocean
$6
Lamp
...lamp
3docean
lamp
a high quality lamp.
Printable
turbosquid
$5
printable giraffe
...uid
royalty free 3d model printable giraffe for download as on turbosquid: 3d models for games, architecture, videos. (1504825)
3d_export
$2
printable audi car
...printable audi car
3dexport
printable audi car
turbosquid
$23
Printable Statue
...ty free 3d model printable statue for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1415137)
turbosquid
$1
heart printable
...y free 3d model heart printable for download as stl and sldpr on turbosquid: 3d models for games, architecture, videos. (1209566)
turbosquid
$1
Printable Hook
...
royalty free 3d model 3d printable hook for download as stl on turbosquid: 3d models for games, architecture, videos. (1413683)
turbosquid
$30
Printable support
... model 3d printable support for download as max, 3ds, and stl on turbosquid: 3d models for games, architecture, videos. (1689342)
turbosquid
$24
Printable Dolphin
...el printable dolphin for download as , dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1602353)
turbosquid
$7
Printable Mug
...e 3d model 3d printable mug for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1496940)
turbosquid
$40
Printable cottage
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Printable dice
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Modern
3d_export
$8
Modern pipo chair Modern furniture
...modern pipo chair modern furniture
3dexport
modern pipo chair. modern furniture
3d_export
$5
modern chair
...modern chair
3dexport
the modern chair for modern interior.
3ddd
$1
modern
...modern
3ddd
двери
коллекция modern
primavera-f, marilin, lago art
фабрика дверей папа-карло
3d_ocean
$19
Modern house
...modern house
3docean
architecture buildin house modern
modern house
3ddd
free
Modern bench
... bench , скамья , лавка
modern bench
3d_ocean
$25
Modern Bed
...modern bed
3docean
modern bed
3d_export
$20
modern sofas
...modern sofas
3dexport
modern sofas
3d_export
$20
modern sofas
...modern sofas
3dexport
modern sofas
3d_export
$20
modern sofas
...modern sofas
3dexport
modern sofas
3d_export
$20
modern sofas
...modern sofas
3dexport
modern sofas