Thingiverse
Full Size Printable Tactical Crossbow Version 2 by KarrMcDebt
by Thingiverse
Last crawled date: 4 years, 2 months ago
I have not yet printed version 2 yet.
This is a work in progress and things will change frequently, (until I start on ver. 3)
The PETG printed bow version is basically done, but I have not finished the fiberglass rod version yet.
(Cut and keyed version of the main body to follow soon.)
This version has a hollow tube through the inside of the foregrip that I'm considering a threaded rod or dowel. (Or I might just make it solid. I haven't decided.)
Fully printable, full size, tactical crossbow. 2 versions; One that uses printed PETG limbs for the bow and one that has holes so you can use fiberglass rods for the bow. (soon)
You will need 2 bolts/nuts/washers to hold the bow in place, a small hair tie/ rubber band, and a medium hair tie/rubber band, as well as a bowstring. With the PETG bow version, I use a pair of small wood dowels for the string.
Remixed from SEVERAL models;
Original concept, bow limbs, and bow limb brackets are taken from
Crossbow, Western style, and Arrow by CCCanyon,
The arrow rail, trigger box, and sights from Crossbow frame by Cerberus89,
The Winchester 94 Front stock (modified) from Fattek,
The hex foregrip Picatinny remix by IronTurbo86,
The Collapsible AR15 Hex Stock by kartingking15,
The Hex cut foregrip by IronTurbo86
The bow tips for fiberglass rods are heavily modified from Recurve Bow Stringer
by DTakehara
This is a work in progress and things will change frequently, (until I start on ver. 3)
The PETG printed bow version is basically done, but I have not finished the fiberglass rod version yet.
(Cut and keyed version of the main body to follow soon.)
This version has a hollow tube through the inside of the foregrip that I'm considering a threaded rod or dowel. (Or I might just make it solid. I haven't decided.)
Fully printable, full size, tactical crossbow. 2 versions; One that uses printed PETG limbs for the bow and one that has holes so you can use fiberglass rods for the bow. (soon)
You will need 2 bolts/nuts/washers to hold the bow in place, a small hair tie/ rubber band, and a medium hair tie/rubber band, as well as a bowstring. With the PETG bow version, I use a pair of small wood dowels for the string.
Remixed from SEVERAL models;
Original concept, bow limbs, and bow limb brackets are taken from
Crossbow, Western style, and Arrow by CCCanyon,
The arrow rail, trigger box, and sights from Crossbow frame by Cerberus89,
The Winchester 94 Front stock (modified) from Fattek,
The hex foregrip Picatinny remix by IronTurbo86,
The Collapsible AR15 Hex Stock by kartingking15,
The Hex cut foregrip by IronTurbo86
The bow tips for fiberglass rods are heavily modified from Recurve Bow Stringer
by DTakehara