Thingiverse
Full Graphical LCD Box Mount by NickDR92
by Thingiverse
Last crawled date: 4 years, 3 months ago
The mounting hooks are designed for the Full Graphic Smart Controller case at https://www.thingiverse.com/thing:213852
I remade this after seeing this post https://www.thingiverse.com/thing:626446. I really liked this design but the space between the legs was too small for my printer. That's why I redesigned the mounting hooks and made them easier to print and use.
I printed this with a prusa i3. Nuzzle diameter is 0,35mm in PLA. I sliced this with Slic3r with layer height 0,2mm, infill 30% honeycomb, brim 3mm and a average print speed of 50mm/s at a temperature of 180°.
The hooks width is 15mm and has a thickness of 4mm. The space between the legs is 6,5 mm. At the bottom of each leg there is a hole of 3mm. This way you can screw both legs together with a M3 bolt. I designed this with Autodesk Inventor and added the design file so you guys can edit.
I remade this after seeing this post https://www.thingiverse.com/thing:626446. I really liked this design but the space between the legs was too small for my printer. That's why I redesigned the mounting hooks and made them easier to print and use.
I printed this with a prusa i3. Nuzzle diameter is 0,35mm in PLA. I sliced this with Slic3r with layer height 0,2mm, infill 30% honeycomb, brim 3mm and a average print speed of 50mm/s at a temperature of 180°.
The hooks width is 15mm and has a thickness of 4mm. The space between the legs is 6,5 mm. At the bottom of each leg there is a hole of 3mm. This way you can screw both legs together with a M3 bolt. I designed this with Autodesk Inventor and added the design file so you guys can edit.