Thingiverse
FT5 Chain Guide
by Thingiverse
Last crawled date: 4 years, 4 months ago
Chain guide that I made for my FT5.
using 2x3mm screws with T Slot Nuts to secure with the 2020 extrusion
It should be able to work with any 2020 extrusion
The open cable chain link I'm using are from RamonSeda https://www.thingiverse.com/thing:2802560
using 2x3mm screws with T Slot Nuts to secure with the 2020 extrusion
It should be able to work with any 2020 extrusion
The open cable chain link I'm using are from RamonSeda https://www.thingiverse.com/thing:2802560
Similar models
thingiverse
free
Wire Loom Clip 2020 Aluminum by sixcrazypants
... the cable chains off my ft5, and opted for a wire loom. this keeps everything connected and in one place on the 2020 extrusion.
thingiverse
free
30mm cable guide / clip for 2020 extrusion by Eric_B
... my own build hypercub to guide the steppermotor cables and the limitswitch cables.
i printed it in petg with 0.25 and no support
thingiverse
free
FT5 Reverse Bowden Mount for 2020 by Garrett_w
...e the same as the ptc (push to connect) fitting that i'm using which is m10 x 1.0mm. it mounts with standard m5 bolts/t-nuts.
thingiverse
free
Yet Another Cable Chain Termination for 2020 by nemokeine
...up portion of the cable chain so i could have a end that clips to the 2020 extrusion of my printer frame for my heated bed cables
thingiverse
free
2020 Slot 5 Extrusion Corner M4 - Single Guide by Modred
...g. there is another file with guide on both sides.
sketchup file attached.
i use it with motedis 2020 typ 5 alu extrusion series.
thingiverse
free
2020 to 4040 extrusion connector, with some adjustability by Radem
...just-ability. i plan on using this to connect a 2020 extrusion to two 45 degree 4040 extrusion for a v groove wheel guide z axis.
thingiverse
free
2020 Filament Guide
...2020 filament guide
thingiverse
small, simple filament guide, for 2020 or can be used on any 20xx extrusion. one bolt.
thingiverse
free
Tarantula filament guide 2020 extrusion by Fabio22italy
...ula filament guide 2020 extrusion by fabio22italy
thingiverse
enjoy this simple design for a filament guide 2020 extrusion clip.
thingiverse
free
Filament Guide for 2020 Extrusion by baggytrowsers
... ts 2020 extrusion. even though there is 2 screw holes for the extrusion, it clipped in tightly enough not to need it in my case.
thingiverse
free
Filament Guide for 2020 extrusions by STTrife
...aluminium extrusions. is slanted so that the filament can go around the corner of an extrusion without dragging on the extrusion.
Ft5
thingiverse
free
Tmotor FT5 by JUNG_HY
...tmotor ft5 by jung_hy
thingiverse
tmortor ft5 frame 3dpart. build & test flight
thingiverse
free
FT5 spool holder by Joe558
...ft5 spool holder by joe558
thingiverse
spool holder for the ft5
thingiverse
free
Folgertech FT5 Cooler by the0ry
... mount.
this is a sloppy remix/edit of the ciiicooler done in tinkercad to fit the ft5, https://www.thingiverse.com/thing:2004629
thingiverse
free
FT5 Spool Holder by deuel18
...ft5 spool holder by deuel18
thingiverse
this is an alternative solution for ft5 users who wanted a better spool holder set up.
thingiverse
free
Ft10 and FT5 / FT7 and FT5 merged with a 7mm drop to level the pulley and stepper
...0 and ft5 / ft7 and ft5 merged with a 7mm drop to level the pulley and stepper
thingiverse
print at 100% infill and rock it out.
thingiverse
free
FT5 bed corner hold-down by Joe558
...ft5 bed corner hold-down by joe558
thingiverse
hold downs for the corners of the aluminum bed on the ft5
thingiverse
free
FT5 with centered Y belt holes by NEMS3D
... the folgertech ft5 printer. original parts didn't have the belt holes centered causing the belt to pop off the idler pulley.
thingiverse
free
FT5 Vista Base by HirschJunge
...e ft5 60% build
to mount you the vista you additionally need 4x m2 - 25mm screws
pictures of the newest version are gonna follow.
thingiverse
free
Fan and sensor mount for stock FT5 by Joe558
... for stock ft5 by joe558
thingiverse
this uses the small induction sensor and a 40mm fan for cooling on the stock ft5 equipment.
Chain
thingiverse
free
chain
...chain
thingiverse
chain #massimino_martello #catena
thingiverse
free
Chain lub for 520 chain by Greekmaker98
...chain lub for 520 chain by greekmaker98
thingiverse
for 520 chain only
thingiverse
free
Chain by Galione1
...chain by galione1
thingiverse
chain, bike style chain. easy to print.
thingiverse
free
chains by Syzguru11
...chains by syzguru11
thingiverse
chains
thingiverse
free
Chain bracelet
... chain bracelet. no support needed. the chain is printed as a whole.
larger chain might need to be scaled down to fit most hands.
thingiverse
free
Chain of Perdition
...chain of perdition
thingiverse
designed to represent a chain of force summoned by casting chain of perdition in pathfinder.
thingiverse
free
Drag Chain
...drag chain
thingiverse
a drag chain.
thingiverse
free
Chain by raken
...chain by raken
thingiverse
chain bracelet
thingiverse
free
Chain
...chain
thingiverse
for gaming and modeling
thingiverse
free
Chain by dshur
...chain by dshur
thingiverse
. chain modeling data
Guide
thingiverse
free
Filament guide (Guide-Fil) by phobosmoon
... by phobosmoon
thingiverse
another filament guide, with cap.
put some double-sided tape under the guide to fix it on your table.
thingiverse
free
Wide Guide and Single Guide by norrillous
...needed some single guides also. i found the ikea lack filament guide by karnschi so i added them in to .stl file as well... enjoy
thingiverse
free
diabolo guide
...diabolo guide
thingiverse
diabolo guide for r6 2011
thingiverse
free
Filament guide
...rse
this filament guide is to be used with the spare roller guide when you replaced the plastic extruder with the aluminum one.
thingiverse
free
Filament Guide Tube Guide by Mrrocketman
...e (e.g. bowden cable) on your prusa.
you can purchase the guide here: http://www.mcmaster.com/#8547k23
i recommend a 2ft length.
thingiverse
free
Wire guide for extruded aluminum and filament guide by Todd_Optional
...ilament guide by todd_optional
thingiverse
this is a wire guide and wire guide with filament guide for 20x40 extruded aluminum.
thingiverse
free
PTFE Guide
...piece of ptfe tube in (od of ~4.1mm) to guide filament to the direct drive.
without it the filament spool was unraveling spaghet.
thingiverse
free
FILAMENT GUIDE
...ww.thingiverse.com/thing:3184808
to be used with: ender 3 filament guide by mattellisonhttps://www.thingiverse.com/thing:3059604
thingiverse
free
Guide porte, door guide by vieen3d
...guide porte, door guide by vieen3d
thingiverse
pièce pour guider une porte coulissante
thingiverse
free
Lower Guide for Truvativ X-Guide Chain Guide by jordandandersen
...ntial part.
tested using makerbot thing-o-matic using abs plastic.
fork it on github: https://github.com/servetus/lowerguide