Thingiverse
FT Gremlin (Chad) Nano Mount by 4iqvmk
by Thingiverse
Last crawled date: 4 years, 12 months ago
This is an FPV camera mount designed for the Flite Test Gremlin Chad Lewis frame and the RunCam Nano camera.https://store.flitetest.com/ft-gremlin-frame-designed-by-chad-lewis-carbon-fiber/https://shop.runcam.com/runcam-nano/
24mm frame hole spacing with M3 screws
20 mm rather than the stock 10 mm stack spacing, which allows more room for a flight board stack
15 deg upward camera tilt
24mm frame hole spacing with M3 screws
20 mm rather than the stock 10 mm stack spacing, which allows more room for a flight board stack
15 deg upward camera tilt