FT Dart/Twin Sparrow V2 Nacelle and Firewall by lschaar

Last crawled date: 4 years ago

Here is an updated version of the new Flite Test Power Pack H Nacelle and Firewall. This is based off of the latest design included with the FT Twin Sparrow. Print it, glue it, install it. I have also included a second firewall that can mount the slightly larger EMax RS1306 motors as they are a bit cheaper than the RS1106 right now. RS1306 SHOULD fit but I have not verified that is does.
You may have to drill out the center hole slightly. My printer made it a little undersized and I had to taper it with a 3/16" drill bit for the firewall to not contact the motor's c-clip
If you bought a Power Pack H, you MUST download and print the 1106 Firewall