Thingiverse
Front Standoff for RotorX Atom RX122 by spencergs
by Thingiverse
Last crawled date: 3 years, 1 month ago
Need a custom height, or replacement front standoff for your atom? The "flex" file contains a standoff 100mm high. To use it, just scale your Z axis appropriately. For example, if you need a 21.5mm standoff, then scale Z axis only to 0.215.
I needed to print at least 3 at a time to keep things from getting melty. I used brim adhesion.
I have been using these for weeks with my Atom, and have yet to break one (100% infill, PLA). However, the screw hole size was quite finicky to dial in, and fit could easily vary with your machine. You could scale X/Y to change the hole size easily if it is too tight or loose.
I carry many products for the RotorX Atom at http://genixrc.com/product-category/rotorx-atom/
I needed to print at least 3 at a time to keep things from getting melty. I used brim adhesion.
I have been using these for weeks with my Atom, and have yet to break one (100% infill, PLA). However, the screw hole size was quite finicky to dial in, and fit could easily vary with your machine. You could scale X/Y to change the hole size easily if it is too tight or loose.
I carry many products for the RotorX Atom at http://genixrc.com/product-category/rotorx-atom/
Similar models
thingiverse
free
Camera Mount Set for RotorX Atom RX122 by spencergs
...the top plate or front standoffs.
i carry many products for the rotorx atom at http://genixrc.com/product-category/rotorx-atom/
thingiverse
free
Atom Armor for RotorX Atom RX122 by spencergs
... racing over concrete or asphalt.
i carry many products for the rotorx atom at http://genixrc.com/product-category/rotorx-atom/
thingiverse
free
RotorX RX122 Atom Antenna Mount by ixlix
...a mount by ixlix
thingiverse
rotorx rx122 atom antenna mount. to be mounted using the forward two standoffs of the fc standoffs.
thingiverse
free
RotorX Atom standoff by arkngelus
...: 2.04mm
screw threads will make its way in the plastic.
stl in metric units so you can adjust the height, by scaling it in cura.
thingiverse
free
RotorX Atom Camera Mount by qtrain23
...ount. this one is 15 degrees, i will add more if requested.
this is designed to fit in an atom using a genix pdb and naze stack.
thingiverse
free
Atom Armor v2 (for all RotorX RX122 frames) by spencergs
...p://genixrc.com/product/atom-armor/
i carry many products for the rotorx atom at http://genixrc.com/product-category/rotorx-atom/
thingiverse
free
RotorX Atom Camera Mount (2 parts) by Procrasher
...lthough may still be a tough print with a filament printer. i had the part printed by sls by shapeways and it came out fantastic.
thingiverse
free
Tevo Tarantula Z axis support by tanasibob
...esive. should fit a 20mm extrusion using 4mm bolts and tnut.
now i can easily square the base with the z axis using this support.
thingiverse
free
RotorX Atom front wall w/Camera mount. by Sweetblu
...ave a drill bit to ream out the holes you may be able to get away with regular filament, but the front posts will be a tight fit.
thingiverse
free
RotorX Atom V1 RunCam Owl Mount by RBNFPV
...he front two standoffs have to be 5mm shorter then rear ones. in he front also are 2 5mm m2 standoffs to hold everyting in place.
Spencergs
thingiverse
free
Atom Armor for RotorX Atom RX122 by spencergs
... racing over concrete or asphalt.
i carry many products for the rotorx atom at http://genixrc.com/product-category/rotorx-atom/
thingiverse
free
IR Headtracker for Steelseries Headsets by spencergs
...practically free.
i printed mine with 100% infill and no supports. designed for these screws: https://www.mcmaster.com/97349a415/
thingiverse
free
Camera Mount Set for RotorX Atom RX122 by spencergs
...the top plate or front standoffs.
i carry many products for the rotorx atom at http://genixrc.com/product-category/rotorx-atom/
thingiverse
free
CC1563 FPV Camera Mount (designed for RX122 RotorX Atom) by spencergs
...om/product/cc1563-camera-mount-set/
i carry many products for the rotorx atom at http://genixrc.com/product-category/rotorx-atom/
thingiverse
free
Atom Armor v2 (for all RotorX RX122 frames) by spencergs
...p://genixrc.com/product/atom-armor/
i carry many products for the rotorx atom at http://genixrc.com/product-category/rotorx-atom/
thingiverse
free
Atom Armor for RotorX Atom RX122 with supports by Puppetx
...first couple layers of the top overhang. credit to spencergs for the original model,...
thingiverse
free
Soft Rotorx Atom Armor Mount by Puppetx
...have worked well with m2x8mm screws. original armor by spencergs updated with supports by myself, then extended for 4mm...
Rx122
thingiverse
free
RotorX RX122 Atom Antenna Mount by ixlix
...a mount by ixlix
thingiverse
rotorx rx122 atom antenna mount. to be mounted using the forward two standoffs of the fc standoffs.
thingiverse
free
RotorX RX122 for paragonuav version of frame by ver2go
...rotorx rx122 for paragonuav version of frame by ver2go
thingiverse
remixed for paragon without the angled slits
thingiverse
free
Atom RX122 antenna mount ( 2 model ) by MichaelHaineault
...n
the middle of the quad and the other one is larger and goes in the front so you can put a camera or a battery on the top plate.
thingiverse
free
RX122 RotorX Atom XAT520 Cam Holder 25°/ 30° by lenne0815
...der 25°/ 30° by lenne0815
thingiverse
rx122 rotorx atom xat520 cam holder 25°
19.5mm height, leaves enoguh space for the kiss cc
thingiverse
free
Front Standoff Camera Mount For The Atom Rx122 by MichaelHaineault
...ffs. it has a 12 degree or a 20 degree angle and fit the cc1563 camera (the 600 tvl one with a mic and a 120 or 170 degree lens).
thingiverse
free
Fatshark Camera Mounts (4 types) for the Atom RX122 by MichaelHaineault
...
4 x m2 screw holes + 1 center m3 hole to secure the mount on the atom rx122 frame
the fatshark camera is press fit into the case
thingiverse
free
RX122 Atom Camera Mount by ixlix
...naze and the genix pdb which makes the usb connector exit the front. this allows a right angle usb cable to get to the connector.
thingiverse
free
Variable angle camera case for the Atom RX122 (cc1563) by MichaelHaineault
...ittle screw to lock the camera hardly in place. this thing should be printed with a maximum precision since the pieces are small.
thingiverse
free
RotorX RX122 Atom Antenna Saver by ixlix
...erse
my antenna (direct soldered) kept breaking so i designed this saver mount. simply attached by the rear two standoff screws.
thingiverse
free
Mini 600 TVL Camera With Mic (120°) Protective Case Atom RX122 by MichaelHaineault
...'s made to be put
in the front of the atom rx122. you can edit the .123d file if you need
an angle cam. the case weight 1.4g.
Rotorx
thingiverse
free
RotorX RX122 Atom Antenna Mount by ixlix
...a mount by ixlix
thingiverse
rotorx rx122 atom antenna mount. to be mounted using the forward two standoffs of the fc standoffs.
thingiverse
free
Pico Cam Mount for RotorX Raiju by IdefixRC
...efixrc
thingiverse
25, 30 and 35 degree pico camera mount for the rotorx raiju.
print it with 10% infill to save weight.
enjoy !
thingiverse
free
Rotorx Raiju motor protectors shoes by t4b_
...rse
snap on motor protectors for rotorx raiju.
may need some scaling to fit perfecly depending on your filament and printer etc.
thingiverse
free
RotorX Atom V1 Buzzer Holder by Dale_w
...e
a buzzer holder for the rotorx atom v1 frame. you really need a buzzer on this tiny quadcopter, so hard to find in long grass.
thingiverse
free
Camera Mount Set for RotorX Atom RX122 by spencergs
...the top plate or front standoffs.
i carry many products for the rotorx atom at http://genixrc.com/product-category/rotorx-atom/
thingiverse
free
rotorx rx155 raiju motor guard protection by skynetcom
...rsion 1 full protection
version 2 light protection
version 3
fullprotection against front
aerodynamic
lighter then fullprotecton
thingiverse
free
Rotorx Atom v3 cable saver by Peck
...3.
there are two files, 2.0mm for top, 3.6mm for bottom (i'm using dys f20a 4in1 esc and dys f4 fc), height may vary for you.
thingiverse
free
CC1563 FPV Camera Mount (designed for RX122 RotorX Atom) by spencergs
...om/product/cc1563-camera-mount-set/
i carry many products for the rotorx atom at http://genixrc.com/product-category/rotorx-atom/
thingiverse
free
Rotorx Atom V3 - Antenna protector by bestvision
...rotorx atom v3 - antenna protector by bestvision
thingiverse
this is a antenna protector build out of pla.
thingiverse
free
RotorX RX122 for paragonuav version of frame by ver2go
...rotorx rx122 for paragonuav version of frame by ver2go
thingiverse
remixed for paragon without the angled slits
Atom
archibase_planet
free
Atomizer
...atomizer
archibase planet
atomizer spray pulverizer
atomizer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$4
Atom
...atom
turbosquid
free 3d model atom for download as blend on turbosquid: 3d models for games, architecture, videos. (1428066)
3d_export
$5
atoms
...atoms
3dexport
turbosquid
$17
Atom
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Atom
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Atom
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Atom - Relax
...atom - relax
3ddd
atom
имеются настройка v-ray + текстуры
3d_export
$10
Atom
...atom
3dexport
just a representation of the unit of matter
3d_export
$5
Atom 3D Model
...atom 3d model
3dexport
atom sings
atom 3d model rem 48528 3dexport
archive3d
free
Atomizer 3D Model
...ve3d
atomizer spray pulverizer
atomizer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Standoff
cg_studio
$30
AGM-154A Joint Standoff Weapon3d model
...
.3ds .c4d .lwo .max - agm-154a joint standoff weapon 3d model, royalty free license available, instant download after purchase.
3d_export
$5
smoke from standoff 2
...m uv.<br>texturs – substanse painter.<br>render - substanse painter iray.<br>model for octane render, unreal 4.
cg_studio
$89
Aim-9M3d model
...joint direct attack munition jdam aim9x aim-9x aim-9m jsow standoff raytheon usaf war warfare combat air semi sidewinder snake...
3d_export
$60
northrop grumman b-2 spirit
...the only acknowledged aircraft that can carry large air-to-surface standoff in a stealth...
3d_export
$15
nimrod anti tank missile
...industries. while primarily designed for anti-tank use, it provides standoff strike capability against a variety of point targets such...
thingiverse
free
20x20 standoff
...20x20 standoff
thingiverse
standoff for 8mm linear rails.
standoff distance 20mm
thingiverse
free
Standoff by charlespax
...standoff by charlespax
thingiverse
this is a standoff created to hold up a friend's monitor.
thingiverse
free
Standoff Holder by jfaller
...standoff holder by jfaller
thingiverse
holder for for m3x6 standoff.
thingiverse
free
Commodore 64 Standoffs
...odore 64. cut off old standoffs, sand smooth then attach these standoffs with epoxy. be sure to align with the holes in the case.
thingiverse
free
BTS7960 Standoff by AlbaTito
...bts7960 standoff by albatito
thingiverse
standoff for bts7960. m3 hardware
Front
archibase_planet
free
Front
...front
archibase planet
facade front bluff
front 3d01a - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
front fork
...front fork
3dexport
front fork
3d_export
$5
Front Desk
...front desk
3dexport
modern and minimal reception front desk
3d_ocean
$4
Medical Front
...medical front
3docean
horror low medical
medical front
3d_ocean
$5
Front Desk
...front desk
3docean
desk front office reception
office reception counter or front desk. cad file and obj file included.
3ddd
free
Axor WaterDream by Front
...r , waterdream , front
axor waterdream by front
3d_export
$5
front nut eye
...front nut eye
3dexport
front nut eye
3d_export
$5
front screw eye
...front screw eye
3dexport
front screw eye
3d_export
$5
front clamping device
...front clamping device
3dexport
front clamping device
archive3d
free
Front 3D Model
...rchive3d
facade front bluff
front 3d01a - 3d model (*.gsm+*.3ds) for interior 3d visualization.