Thingiverse
Front Bumper License Plate Cap Inserts CRV Honda 2004 by elhalpern
by Thingiverse
Last crawled date: 4 years, 10 months ago
Missing one and decided to mirror it and replace both license plate caps
These can be installed with epoxy or caulk. I designed them to use rust proof 1-inch sheet-rock screws to spread the small plug. I ground the pointy tip off of the screw, just in case the bumper skin is pushed back far enough to touch the AC condenser... but if it ends up that far back you have bigger problems.
You might want to scale these down by 1% or 2% for a better fit... depending on the material and printer you use.
These can be installed with epoxy or caulk. I designed them to use rust proof 1-inch sheet-rock screws to spread the small plug. I ground the pointy tip off of the screw, just in case the bumper skin is pushed back far enough to touch the AC condenser... but if it ends up that far back you have bigger problems.
You might want to scale these down by 1% or 2% for a better fit... depending on the material and printer you use.