Freebord Binding Fix by Suntorn

Last crawled date: 4 years, 5 months ago

this is a fix for the Freebord S2 bindings which covers the gap between the hooks and the deck. There are 4 sizes, 3.0,4.0,5.0, and 6.0. The 6.0 is for bindings set with the screw in the top hole (highest setting). The 3.0 is for the binding set with the screw at the 3rd hole from the bottom. When installed properly on square base plates there should be less than 1mm of space left anywhere on hook. There is a block that needs to be removed and is in the print only as a support. Once removed slide the bindingfix of the correct size onto the baseplate first then slide the hook ontop, insert 2 screws and tighten. some light sanding might be necessary if the fit is not as desired. These originals were printed with PLA, so they my shrink slightly with other materials. You may have to adjust them accordingly.
If you like would like a version that fits any hole get the (Freebord binding fixer multi)
I would love it if you could leave feedback and makes thank you! enjoy!