Thingiverse
![Franklyn Panel Glide Blind Runner by gorff](/previews/8283806.jpg)
Franklyn Panel Glide Blind Runner by gorff
by Thingiverse
Last crawled date: 3 years, 2 months ago
This is a replacement part for the runner for Franklyn brand blinds. May fit other blinds.http://www.franklyn.net.au/indoor-blinds/panel-glide
For this part, you need to salvage the pin and the wheel, and insert them into the runner like the original. They should be firmly friction fit in, so they will need to be tapped in with a hammer.
I had 18 of these break off of my blinds after becoming weak from sun damage. Replacements can be bought here: https://www.blinds2go.com.au/shop/panel-glide-blind-runner/
however they cost 3.50 for a bit of injection moulded plastic which seemed ridiculous to me; hence the part.
Print with support for the gap where the wheel goes. I needed to print with a 3mm brim to stop the ends lifting.
Hope this helps!
Ps im planning on sketching up the other plastic parts like the catchers. Stay tuned.
For this part, you need to salvage the pin and the wheel, and insert them into the runner like the original. They should be firmly friction fit in, so they will need to be tapped in with a hammer.
I had 18 of these break off of my blinds after becoming weak from sun damage. Replacements can be bought here: https://www.blinds2go.com.au/shop/panel-glide-blind-runner/
however they cost 3.50 for a bit of injection moulded plastic which seemed ridiculous to me; hence the part.
Print with support for the gap where the wheel goes. I needed to print with a 3mm brim to stop the ends lifting.
Hope this helps!
Ps im planning on sketching up the other plastic parts like the catchers. Stay tuned.
Similar models
thingiverse
free
![IKEA blinds hang by christoikos](/t/8307228.jpg)
IKEA blinds hang by christoikos
...ted to make a replacement for the lower part of the plastic hang of my ikea blind.
print and fit, no special instructions needed!
thingiverse
free
![replacement wheels for Joustruck (Joustra)](/t/4897048.jpg)
replacement wheels for Joustruck (Joustra)
...nt design without support.
i printed the wheels by red abs. i am not sure what kind of plastic will do this reaction with rubber.
thingiverse
free
![Vertical Blind Clip by Bathys](/t/8924764.jpg)
Vertical Blind Clip by Bathys
... hope it helps someone repair those expensive blinds because it's these small plastic parts that cause most of the headaches.
thingiverse
free
![Blinds adjuster wheel by Jsmiley](/t/8096981.jpg)
Blinds adjuster wheel by Jsmiley
... i used pla to make them and feel free to share with others, since i know a lot of people throw their blinds out once they break.
thingiverse
free
![Craftsman Lawn Mower Wheel - Rear by chriskmurray](/t/9228270.jpg)
Craftsman Lawn Mower Wheel - Rear by chriskmurray
... the wheel.
i will also include a single file that combines both if you would just like to print the entire thing in one plastic.
thingiverse
free
![Blind Knob](/t/4976824.jpg)
Blind Knob
...b
thingiverse
this is a replacement part for a broken blind open/close knob. a bit chubby to fit the design of my original need.
thingiverse
free
![iRobot Scooba 390 Replacement wheel by ciccio92](/t/8645622.jpg)
iRobot Scooba 390 Replacement wheel by ciccio92
...like my design, feel free to click the "leave a tip" button on my profile to encourage me to continue designing things.
thingiverse
free
![Venetian blinds rod by Nicofr57](/t/8836755.jpg)
Venetian blinds rod by Nicofr57
... you want, the parts are a tight fit so it doesn't need glue. the main part is 15 cm long so can be printed on most printers.
thingiverse
free
![Replacement part used in vertical blinds.](/t/4872148.jpg)
Replacement part used in vertical blinds.
...o top hook.
recommended to print in abs.
will need to touch up the inner corners slightly with a knife so it slides into the hook
thingiverse
free
![Vertical blind parts by pintokitkat](/t/8686572.jpg)
Vertical blind parts by pintokitkat
...ufacturers, so in my house at least these replacements are 'universal'. if they don't fit your blinds though, sorry!
Gorff
thingiverse
free
![cable holder by gorff](/t/5030076.jpg)
cable holder by gorff
...cable holder by gorff
thingiverse
meant to copy the utility of the ikea signum tray. use 2mm radius screws.
thingiverse
free
![face shield by gorff](/t/5032417.jpg)
face shield by gorff
... gorff
thingiverse
just a simple remix to add some chamfering to match the base model. dimensions otherwise should be preserved.
thingiverse
free
![Blind facade clip by gorff](/t/8253465.jpg)
Blind facade clip by gorff
...blind facade clip by gorff
thingiverse
a quick piece i traced for a clip to hold on the facade for your blinds.
thingiverse
free
![prestacked by gorff](/t/5060624.jpg)
prestacked by gorff
...ht for cura
this model has a tiny connecting part between layers, so prusa slicer and cura shouldnt complain about floating parts
thingiverse
free
![Smaller 3d1 face shield by gorff](/t/5040891.jpg)
Smaller 3d1 face shield by gorff
... to allow the 3mmtpu to be used with the prusa rc1, in a nano version
this should let you print on a smaller bed, like a 140x140
thingiverse
free
![OSVR belt box/breakout box clip by gorff](/t/8597458.jpg)
OSVR belt box/breakout box clip by gorff
...l for the belt box clip (the bit that is easy to snap off).
im uploading it here so you dont have to search for an hour like me.
thingiverse
free
![Nolo VR Controller Mount by gorff](/t/8605069.jpg)
Nolo VR Controller Mount by gorff
...a nice wall mounted stand.
i am also working on making an 'assembly required' version, for my printers tiny build plate.
thingiverse
free
![Prusia Shield R3.1 remix with 3mm headband by gorff](/t/5027788.jpg)
Prusia Shield R3.1 remix with 3mm headband by gorff
...u flexi filament as the head band strap. their old design didnt include the updates that prusia had made to the original design.
Franklyn
3dwarehouse
free
![FRANKLYN](/t/12089409.jpg)
FRANKLYN
...franklyn
3dwarehouse
3dwarehouse
free
![200 franklyn rt bath](/t/5224723.jpg)
200 franklyn rt bath
...200 franklyn rt bath
3dwarehouse
200 franklyn rt bath
3dwarehouse
free
![214 franklyn store front](/t/7509063.jpg)
214 franklyn store front
...214 franklyn store front
3dwarehouse
214 franklyn store front for babo
3dwarehouse
free
![Deliz Franklyn](/t/9586213.jpg)
Deliz Franklyn
...deliz franklyn
3dwarehouse
1 1/8 x 2 1/4
3dwarehouse
free
![RING- deliz franklyn](/t/9580088.jpg)
RING- deliz franklyn
...ring- deliz franklyn
3dwarehouse
ring
3dwarehouse
free
![VASE- deliz franklyn](/t/7053922.jpg)
VASE- deliz franklyn
...vase- deliz franklyn
3dwarehouse
vase
3dwarehouse
free
![A Phrase- - deliz franklyn](/t/7054412.jpg)
A Phrase- - deliz franklyn
...a phrase- - deliz franklyn
3dwarehouse
a phrase
3dwarehouse
free
![238 Franklyn Street - Nanaimo](/t/7895786.jpg)
238 Franklyn Street - Nanaimo
...238 franklyn street - nanaimo
3dwarehouse
building at 238 franklyn street in nanaimo #annex #city_hall #downtown #nanaimo
3dwarehouse
free
![a Knob- - deliz franklyn](/t/7053853.jpg)
a Knob- - deliz franklyn
...a knob- - deliz franklyn
3dwarehouse
a knob #my_knob
Glide
turbosquid
$10
![Shark Glide](/t/13243231.jpg)
Shark Glide
...osquid
royalty free 3d model shark glide for download as stl on turbosquid: 3d models for games, architecture, videos. (1216724)
3ddd
$1
![душ Crosswater Glide](/t/601371.jpg)
душ Crosswater Glide
...душ crosswater glide
3ddd
crosswater , душ
crosswater glide 400mm fixed shower
turbosquid
$25
![Glide Master](/t/13349394.jpg)
Glide Master
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
![Glide-Armchair](/t/13460641.jpg)
Glide-Armchair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$17
![Glide coffee table](/t/13366622.jpg)
Glide coffee table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
![Flymo-Glide Master-360](/t/625518.jpg)
Flymo-Glide Master-360
...flymo-glide master-360
3ddd
газонокосилка
офсайт:http://www.flymo.com/int/products/lawn-mowers/glide-master-360/
3d_export
$99
![HarleyDavidson Electra Glide 2013 3D Model](/t/320405.jpg)
HarleyDavidson Electra Glide 2013 3D Model
...ruiser harley davidson chopper hd classic retro usa electra glide
harleydavidson electra glide 2013 3d model squir 72560 3dexport
cg_studio
$99
![Harley Electra Glide 20133d model](/t/638739.jpg)
Harley Electra Glide 20133d model
...s .c4d .fbx .lwo .max .obj - harley electra glide 2013 3d model, royalty free license available, instant download after purchase.
3d_export
$129
![Harley-Davidson Road Glide 2015 3D Model](/t/129563.jpg)
Harley-Davidson Road Glide 2015 3D Model
...on hd usa 2015 2016 touring 2017 road glide harley-davidson street
harley-davidson road glide 2015 3d model squir 100419 3dexport
turbosquid
$160
![Harley Davidson Tri Glide 3d model](/t/13383661.jpg)
Harley Davidson Tri Glide 3d model
... model harley davidson tri glide 3d model for download as skp on turbosquid: 3d models for games, architecture, videos. (1433790)
Runner
turbosquid
$20
![runner](/t/13309449.jpg)
runner
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$11
![Runner](/t/13345405.jpg)
Runner
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
![cloud runner](/t/13279687.jpg)
cloud runner
...osquid
royalty free 3d model cloud runner for download as ma on turbosquid: 3d models for games, architecture, videos. (1343386)
turbosquid
$13
![Runner Woman](/t/13277844.jpg)
Runner Woman
...squid
royalty free 3d model runner woman for download as max on turbosquid: 3d models for games, architecture, videos. (1269887)
turbosquid
$27
![Jaws Runner](/t/13422824.jpg)
Jaws Runner
...free 3d model jaws runner for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1347511)
turbosquid
$29
![turkey runner](/t/13249460.jpg)
turkey runner
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
![Outdoor Runner](/t/13491754.jpg)
Outdoor Runner
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
![ship/runner](/t/13252947.jpg)
ship/runner
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$30
![Runner Mech3d model](/t/684547.jpg)
Runner Mech3d model
...runner mech3d model
cgstudio
.obj - runner mech 3d model, royalty free license available, instant download after purchase.
3d_export
$15
![Road runner 3D Model](/t/135577.jpg)
Road runner 3D Model
...oad runner bird cartoon looney tunes wile coyote animation animated high poly tune kid
road runner 3d model buncic 79542 3dexport
Blind
archibase_planet
free
![Blind](/t/949973.jpg)
Blind
...blind
archibase planet
blind venetian blind jalousie
blind - 3d model for interior 3d visualization.
archibase_planet
free
![Blinds](/t/949989.jpg)
Blinds
...blinds
archibase planet
blinds blind jalousie
blinds n270313 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Blind](/t/949983.jpg)
Blind
...blind
archibase planet
blind venetian blind jalousie
blind n031007 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Blind](/t/949974.jpg)
Blind
...blind
archibase planet
blind jalousie
blind - 3d model for interior 3d visualization.
archibase_planet
free
![Blind](/t/949972.jpg)
Blind
...blind
archibase planet
blind sunblind jalousie
blind - 3d model for interior 3d visualization.
archibase_planet
free
![Blind](/t/950424.jpg)
Blind
...blind
archibase planet
blind curtain
blind - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Blind](/t/949977.jpg)
Blind
...blind
archibase planet
blind jalousie
venetian blind 1- 3d model for interior 3d visualization.
archibase_planet
free
![Blind](/t/949978.jpg)
Blind
...blind
archibase planet
venetian blind jalousie
venetian blind 2 - 3d model for interior 3d visualization.
3d_ocean
$9
![Blinds](/t/923075.jpg)
Blinds
...blinds
3docean
blinds curtain decor decoration drapes flat furniture home house interior jalousie
?urtains and blinds
archibase_planet
free
![Blind](/t/949984.jpg)
Blind
...blind
archibase planet
venetian blind jalousie
so blinds - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Panel
3d_export
$15
![panel](/t/11492663.jpg)
panel
...panel
3dexport
panel
archibase_planet
free
![Panel](/t/949385.jpg)
Panel
...panel
archibase planet
panel
panel - 3d model for interior 3d visualization.
3d_export
$5
![panel](/t/11492657.jpg)
panel
...panel
3dexport
panel with cones
3ddd
$1
![Panels](/t/734186.jpg)
Panels
...panels
3ddd
панель
panels
3d_export
$5
![panel](/t/11492656.jpg)
panel
...panel
3dexport
panels grapes with birds
archibase_planet
free
![Panel](/t/947891.jpg)
Panel
...panel
archibase planet
panel wainscot dado
play panel n050707 - 3d model for interior 3d visualization.
archibase_planet
free
![Panel](/t/950023.jpg)
Panel
...panel
archibase planet
lining panel facing material
panel 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
![Panel](/t/950019.jpg)
Panel
...panel
archibase planet
lining panel facing material
panel 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Panel](/t/947187.jpg)
Panel
...panel
archibase planet
keyboard patchboard finger-board
security panel - 3d model for interior 3d visualization.
turbosquid
$10
![Panel](/t/13288707.jpg)
Panel
...l
turbosquid
royalty free 3d model panel for download as stl on turbosquid: 3d models for games, architecture, videos. (1387163)