Thingiverse
Frame mount for Hemera in bowden setup by RETROPUK
by Thingiverse
Last crawled date: 4 years, 1 month ago
Mount to attach Hemera extruders to my Geeetech A10M frame.
Requires 2 x M4 * 12mm (15mm including head) bolts and M4 t-nut to attach to the frame. (I reused the t-nuts from the original geeetech extruders.)
Walls are 5mm thick which should allow use of original Hemera bolts, please make sure you check dimensional accuracy of your print and read the e3d documentation about importance of bolt length and depth - failure to do so could result in you breaking the mounting points of the Hemera.
I printed with 0.2mm layer height, with 35% infill in cubic subdivision pattern.
Requires 2 x M4 * 12mm (15mm including head) bolts and M4 t-nut to attach to the frame. (I reused the t-nuts from the original geeetech extruders.)
Walls are 5mm thick which should allow use of original Hemera bolts, please make sure you check dimensional accuracy of your print and read the e3d documentation about importance of bolt length and depth - failure to do so could result in you breaking the mounting points of the Hemera.
I printed with 0.2mm layer height, with 35% infill in cubic subdivision pattern.