Thingiverse
Fractal Design Define R5 Frontpanel Mount by yenero
by Thingiverse
Last crawled date: 4 years, 5 months ago
When I first got the case, I removed the front panel because the airflow was too low when closed. Since I didn't like the case without the front, I printed myself an attachment with which all sides of the front panel are open and let enough air through.
The new arms are attached to the hinges of the front panel. So that you can use all the possible 4 hinges, I also modeled the hinges. The arms can easily be clipped to the case. Approach slowly the first time! You may have to shorten the arms a bit to make them fit perfectly.
Printing instructions:
Part Number Quality
Hinges 2x Normal
Arms 4x Normal
The new arms are attached to the hinges of the front panel. So that you can use all the possible 4 hinges, I also modeled the hinges. The arms can easily be clipped to the case. Approach slowly the first time! You may have to shorten the arms a bit to make them fit perfectly.
Printing instructions:
Part Number Quality
Hinges 2x Normal
Arms 4x Normal