Thingiverse
FR7Heavy v#.# by stynkebutt
by Thingiverse
Last crawled date: 3 years, 4 months ago
NOT FOR COMMERCIAL USE
FR7Heavy v5.1 - https://youtu.be/BBPZeQqF9sI
FR7Heavy v5.x Frame Files
Only the latest and greatest cut files will be posted. Old files will be removed.
Heavy utilizes the standard FR7 v5.1 plates: https://www.thingiverse.com/thing:4141676
3D Print files: https://www.thingiverse.com/thing:3601947
The Heavy specific Top Plate should be utilized when running a 4 capacitor pack as shown in the pictures.
Arms accept 19x19 motors only!
Recommended Plate Thicknesses:
Top Plate: 2.0mm
Front Arm: 6mm
Rear Arm: 6mm
Hardware BOM: See attached picture
Description; Qty; Notes
Standoffs:
3mm Standoff, Round (5mm OD), 10mm; Qty 2; Front
3mm Standoff, Round (5mm OD), 25mm; Qty 4; Rear
3mm Standoff, Round (5mm OD), 39mm; Qty 2; Cam Uprights (cut 40mm standoffs down to 39, or shim the 25mm standoffs with 1mm washer)
3mm Standoff, Round (5mm OD), 30mm; Qty 2; HD Camera Holder
Button Head Screws
Button Head Screw, M3 x 5; Qty 2; Front Standoffs
Button Head Screw, M3 x 8; Qty 18; Standoffs and Cam Holder
Button Head Screw, M3 x 18; Qty 9; Arms (may opt to use a single washer at the center clamp fastener in order to ensure stack clearance.
Button Head Screw, M3 x 14; Qty 4; Arm Ends
Flush Head Screws
90deg Flush Head Screw, M3 x 9; Qty 12; Motors (If 9mm are unavailable, suggest using 8mm)
Misc. Hardware
3mm Press Nuts; 9; https://www.mcmaster.com/94100a110 or equivalent
FR7Heavy v5.1 - https://youtu.be/BBPZeQqF9sI
FR7Heavy v5.x Frame Files
Only the latest and greatest cut files will be posted. Old files will be removed.
Heavy utilizes the standard FR7 v5.1 plates: https://www.thingiverse.com/thing:4141676
3D Print files: https://www.thingiverse.com/thing:3601947
The Heavy specific Top Plate should be utilized when running a 4 capacitor pack as shown in the pictures.
Arms accept 19x19 motors only!
Recommended Plate Thicknesses:
Top Plate: 2.0mm
Front Arm: 6mm
Rear Arm: 6mm
Hardware BOM: See attached picture
Description; Qty; Notes
Standoffs:
3mm Standoff, Round (5mm OD), 10mm; Qty 2; Front
3mm Standoff, Round (5mm OD), 25mm; Qty 4; Rear
3mm Standoff, Round (5mm OD), 39mm; Qty 2; Cam Uprights (cut 40mm standoffs down to 39, or shim the 25mm standoffs with 1mm washer)
3mm Standoff, Round (5mm OD), 30mm; Qty 2; HD Camera Holder
Button Head Screws
Button Head Screw, M3 x 5; Qty 2; Front Standoffs
Button Head Screw, M3 x 8; Qty 18; Standoffs and Cam Holder
Button Head Screw, M3 x 18; Qty 9; Arms (may opt to use a single washer at the center clamp fastener in order to ensure stack clearance.
Button Head Screw, M3 x 14; Qty 4; Arm Ends
Flush Head Screws
90deg Flush Head Screw, M3 x 9; Qty 12; Motors (If 9mm are unavailable, suggest using 8mm)
Misc. Hardware
3mm Press Nuts; 9; https://www.mcmaster.com/94100a110 or equivalent
Similar models
thingiverse
free
FRHybrid v1.x Frame Cut Files
...e.
3mm press nuts; 9; https://www.mcmaster.com/94100a110 or equivalent
3d print files: https://www.thingiverse.com/thing:3601947
thingiverse
free
FRL v# by stynkebutt
...ad screw m3 x 12, qty 9 (arms)
button head screw m2 x16, qty 4 (vista)
hex nut m2, qty 4 (vista)
3mm standoff, round, 35mm, qty 4
thingiverse
free
FR7 v5.x Frame Cut Files
...e.
3mm press nuts; 9; https://www.mcmaster.com/94100a110 or equivalent
3d print files: https://www.thingiverse.com/thing:3601947
thingiverse
free
FR10-G Quadcopter Frame
...o will require some sanding to fit. the tighter the better.
link to the original frame: https://www.thingiverse.com/thing:3652100
thingiverse
free
Nimble Gimbal - Gimbaling Extruder Motor Mount for Zesty Nimble by slonold
...?). with the x60 i went with a 0.3mm nozzle and 0.2mm extrusion width, 3 perimeters, 0.125 layer height and 5 top/bottom layers.
thingiverse
free
6mm x 0.5mm x 0.5mm Washer
...6mm x 0.5mm x 0.5mm washer
thingiverse
washer with 6mm od, .5mm id, .5mm thick
cults
free
S1-SCORPION (Mussy Design)
... mm hex head screw
6 mm x mm od carbon fiber rod (qty 3)
v grooved bearing 3 mm id 12 mm od 4 mm h (qty 2)
m3 flat washer (qty 2)
thingiverse
free
S1-SCORPION (Mussy Design) by mussy
...mm hex head screw
6 mm x mm od carbon fiber rod (qty 3)
v grooved bearing 3 mm id 12 mm od 4 mm h (qty 2)
m3 flat washer (qty 2)
3dwarehouse
free
screw, machine, button head, M3-0.5 x 6mm, McMaster-Carr 94500A221
...utton head, m3-0.5 x 6mm, mcmaster-carr 94500a221
3dwarehouse
screw, machine, button head, m3-0.5 x 6mm, mcmaster-carr 94500a221
thingiverse
free
Reptile 500 V1 FatShark 600 TVL Camera Mount by MichaelErwin
...ame mount holes as well. the mount provides a super rigid mount.
requires
qty 2 m3 x 8 button head
qty 2 m3 x 20 button head
Stynkebutt
thingiverse
free
FR# Double SMA Lock by stynkebutt
...fr# double sma lock by stynkebutt
thingiverse
not for commercial use
sma lock for use with the fr double sma platypuss tails.
thingiverse
free
Dubro Magnetic Adapter by stynkebutt
...res qty 2, 6mm diameter magnets.https://www.amazon.com/gp/product/b075pmlvwq/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=utf8&psc=1
thingiverse
free
FRango M7 TBS Gimbal Guards by stynkebutt
...be printed without supports depending on printer performance.
sli3er and built in supports result in a cleaner concave underside.
thingiverse
free
FRL v# by stynkebutt
...ad screw m3 x 12, qty 9 (arms)
button head screw m2 x16, qty 4 (vista)
hex nut m2, qty 4 (vista)
3mm standoff, round, 35mm, qty 4
thingiverse
free
BS5 / BS6 Frame and Prints by stynkebutt
...d), 20mm; 1; hd holder
button head screw, m3 x 5; 4; standoffs, top
button head screw, m3 x 8; 8; standoffs, bottom and hd holder
thingiverse
free
FR7 Hero ND Filter Mounts by BMC3D
...nd-compatible gopro hero mounts for the fr7 frame by @stynkebutt just the hero 8 for not, but more to...
thingiverse
free
FR7 platypus for M8Q-5883 and a vertical Immortal T antenna by PBenko
...i combined the trays of the base design by stynkebutt took the gps tray from gnjac0rp and slapped the...
thingiverse
free
FR7 tail for Matek M8Q-5883 GPS (plus dual SMA) by dadfpv
...dual smas. i like the official platypus tails by @stynkebutt so i designed this one to look pretty similar....
thingiverse
free
FR7 V4 - DLQ Edit
...- dlq edit thingiverse this is my edit of stynkebutt#39;s fr7 frame. i've been sketching ideas for a 7...
V
design_connected
$16
V Chair
...v chair
designconnected
v chair computer generated 3d model.
design_connected
$11
V Hanglamp
...v hanglamp
designconnected
arturo alvarez v hanglamp computer generated 3d model. designed by alvarez, arturo .
turbosquid
$25
Borbet V
...v
turbosquid
royalty free 3d model borbet v for download as on turbosquid: 3d models for games, architecture, videos. (1381618)
turbosquid
free
Saturn V
...rn v
turbosquid
free 3d model saturn v for download as blend on turbosquid: 3d models for games, architecture, videos. (1651098)
turbosquid
$40
V motor
...turbosquid
royalty free 3d model v motor for download as max on turbosquid: 3d models for games, architecture, videos. (1379483)
turbosquid
$7
V for Van
...rbosquid
royalty free 3d model v for van for download as max on turbosquid: 3d models for games, architecture, videos. (1695889)
turbosquid
$5
Letter v
...urbosquid
royalty free 3d model letter v for download as max on turbosquid: 3d models for games, architecture, videos. (1408535)
turbosquid
$5
Letter v
...urbosquid
royalty free 3d model letter v for download as max on turbosquid: 3d models for games, architecture, videos. (1408534)
turbosquid
$15
BonePile V
...oyalty free 3d model bonepile v for download as blend and obj on turbosquid: 3d models for games, architecture, videos. (1546310)
turbosquid
$2
FONT V
...quid
royalty free 3d model font v for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1549450)