Thingiverse
FPV Indoor Gate Hanger
by Thingiverse
Last crawled date: 5 years, 6 months ago
I wanted to hang gates from the ceiling because I was tired of ground effect when they were on the ground. Drilling holes or gluing things to the ceiling wasn't an option. So I created this to clip onto the lights.
There are over hangs so make sure you use supports. Its designed so that over hangs are only above the bed.
---Make sure your lights don't get hot---
My lights are LED which is important. If the lights get hot they will melt the print which could be a safety hazard. I left mine on for 8 hours and they were still cool to the touch.
There are over hangs so make sure you use supports. Its designed so that over hangs are only above the bed.
---Make sure your lights don't get hot---
My lights are LED which is important. If the lights get hot they will melt the print which could be a safety hazard. I left mine on for 8 hours and they were still cool to the touch.