FPV Camera mount V3 22degrees by BrianMatthew

Last crawled date: 4 years, 1 month ago

A nice simple 22degree camera mount, takes FatShark Pilot cams, HS1177 and PZ cameras in their cases, uses a O'ring to hold it in place and recommend a small piece of double sided tape for dampening. Due to the coarseness of the 3d printed surface the ring won't slide, plus because of its structure wrapped in such a way it locks it's self in quiet nicely... special thanks to my buddy Jeff, for the idea of the o-ring. After many successes with the design it would still pop off the frames with only double sided tape holding the assembly down, hence the redesign and addition of the 3mm bolt and slot for a 3mm Nylock nut. nice and clean, very elegant and functional.