Thingiverse
FPV AIO mount for Syma X5C by vzzbx
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is an FPV AIO camera mount for a Syma X5C. It is meant to be strapped on top of the canopy. I use this mount on my brushless Syma X5C to fly FPV with it. The mount has a hole for the battery strap to slip through for secure mounting.
The mount was designed with this Lantian AIO unit in mind, but I also used it successfully with a TX01 module.
UPDATE 08/20/2017: Added a revised mount with an additional slot to hold a DC/DC converter for AIO systems that require 5V such as the Boldclash F08.
Print the mount in TPU, I personally use Ninjaflex. Using a flexible material is advisable because you need to be able to pull the frontside with the lens hole forward to insert the module. You can then secure the module in place using some elastic bands.
If you use a hard plastic such as PLA then you are advised to cut away some plastic to modify the hole into a slot. Again you can then secure the module with elastic bands.
This mount is quite heavy so if you mount it on an original X5C it might fly a bit sluggish... I use it exclusively on my brushless 3S X5C.
The mount was designed with this Lantian AIO unit in mind, but I also used it successfully with a TX01 module.
UPDATE 08/20/2017: Added a revised mount with an additional slot to hold a DC/DC converter for AIO systems that require 5V such as the Boldclash F08.
Print the mount in TPU, I personally use Ninjaflex. Using a flexible material is advisable because you need to be able to pull the frontside with the lens hole forward to insert the module. You can then secure the module in place using some elastic bands.
If you use a hard plastic such as PLA then you are advised to cut away some plastic to modify the hole into a slot. Again you can then secure the module with elastic bands.
This mount is quite heavy so if you mount it on an original X5C it might fly a bit sluggish... I use it exclusively on my brushless 3S X5C.
Similar models
thingiverse
free
Syma X5C brushless conversion kit by vzzbx
... to accomodate the screwholes.
more information will be available on the link above.
update: i made an fpv pod for this quad too.
thingiverse
free
Dr!ft FPV mount
...op of the car. the top is for the battery, just use a little velcro strap to keep it secured. recommend 200-300mha square battery
thingiverse
free
Oculus Rift Leap Motion Mount by alextoff
...obably better to use two thin elastic bands instead. i just used whatever i had on hand to test it, and it worked really well.
thingiverse
free
8.5mm Motors (Dia) Quadcopter 34x35.5 PCB Support Max (Syma X5C) by ajaybnl
...e model for 7mm motors (search "syma 7mm")
print using 20-40% infill, pla will go.
add rubber bands to fix pcb/ battery
thingiverse
free
7mm Motors (Dia) Quadcopter 34x35.5 PCB Support (Syma X5C) by ajaybnl
...del for 8.5mm motors (search "syma 8.5mm")
print using 20-40% infill, pla will go.
add rubber bands to fix pcb/ battery
thingiverse
free
JJRC H12C mount for Syma X5C-1 X5SC FPV by tgoacher
... like mine, the friction stay has failed.
blogged, as usual, here: http://funwithelectrons.blogspot.co.uk/2015/11/quadcopter.html
thingiverse
free
SYMA X5HC angled camera mount by rkelley
...s mount to angle the camera even more. now the camera sits level with the horizon at full speed for a view that is more like fpv.
thingiverse
free
SYMA X5C WALL HOOK modified from dionlevi by esbearow
...omponents. i just used nails to mount it to the wall but screw holes are still there. thanks to dionlevi for the original design.
thingiverse
free
Quanum Pico mount for Syma X5C by simondlevy
...x5c before attaching the plate, using e6000 or a similar ...
thingiverse
free
Dragonlink V2 Sideways cradle by Matador2k7
... secure the dragonlink tx to the cradle and the cradle to the fpv stand with velcro straps or zip ties. worked for me, just fine.
Vzzbx
thingiverse
free
Lipo battery protector by vzzbx
...s a battery protector for use with lipo batteries that are mounted underneath the quadcopter.
print it using a flexible material.
thingiverse
free
Martian frame battery protector by vzzbx
...se this to avoid punctures when i strap my battery under the frame.
i print this in ninjaflex (tpu) for better impact protection.
thingiverse
free
Manfrotto 190 foot by vzzbx
...ook as good as the original one, but gets the job done.
you should really print this using a flexible material. i used ninjaflex.
thingiverse
free
Runcam Mini Split for Kingkong ET115 by vzzbx
... and 35 degrees.
print it in flexible filament such as ninjaflex for added dampening. the design should be usable in pla though.
thingiverse
free
Mobius Mini mount by vzzbx
...you can enable upside down mode in the configuration software msetup.
note: the openscad preview looks strange at thingiverse...
thingiverse
free
EF-02 camera mount for Eachine E010 by vzzbx
... degrees. the openscad file is included for those who want to tinker.
i print this thing in petg, but pla or abs should work too.
thingiverse
free
Flight controller mounting plate by vzzbx
... sturdiness.
i added an stl with 5mm studs and one with 3mm. if you want a different height you can specifiy so in the scad file.
thingiverse
free
Buzzer mount for 155mm QA-X4 quadcopter by vzzbx
...ly been done by modifying the included openscad files.
i print these items in flexible filament such as ninjaflex for ruggedness.
thingiverse
free
Soft mount pad for 1104, 1306 or 1806 motors by vzzbx
...acing you use the openscad file and change the spacing1 and spacing2 parameters to your needs.
must be printed in tpu (ninjaflex)
thingiverse
free
Morphite X155 camera mount by vzzbx
... either side of the camera.
mount the lens and adjust focus.
the original openscad files are provided to allow for customisation.
X5C
thingiverse
free
Syma X5C Foot by Thinkibot
...5c foot by thinkibot
thingiverse
replacement feet for syma x5c quadcopter. if made from abs the
approximate weight is 3.6 grams.
thingiverse
free
Battery case with charger for Syma X5C by Habishek
...battery case with charger for syma x5c by habishek
thingiverse
battery case with charger for syma x5c
thingiverse
free
X5C Mod by Slag
...n be printed without supports, functionally but not pretty. i would suggest using mesh mixer to ad a support or two.
no supports
thingiverse
free
Syma X5C battery holder by Leguil
...5c drone. there is also a place to put the battery charger.
i added the openscad file for changing the numbers of battery holder.
thingiverse
free
Quanum Pico mount for Syma X5C by simondlevy
... you must first remove the existing flight controller from the x5c before attaching the plate, using e6000 or a similar adhesive.
thingiverse
free
Syma X5C Antenna Mod by ChrisUFO
...after soldering the wire onto the controller board, the wire goes through this shell and the shell snaps into the stock location.
thingiverse
free
Syma x5c battery box by Mattao
...r battery is can't recover from a altitude drop. need to figure out a way to boost the thrust. anyways hope it helps someone.
thingiverse
free
syma x5c battery cover by her01n
...down. i have tried to make this easy to print. it does not require brim or support.
i have added a version without the signature.
thingiverse
free
Syma X5C Foot remixed by hannes04
...syma x5c foot remixed by hannes04
thingiverse
one side could not fit the copter. i remixed it so both sides fit the copter
thingiverse
free
SYMA X5C WALL HOOK by dionlevi
...all hook by dionlevi
thingiverse
a simple wall hook for the boys,,
would appreciate it if you print this please let me know,,
Syma
3d_ocean
$2
Syma 90 construction set
...syma 90 construction set
3docean
aluminium construction syma
aluminium syma system set
3d_export
$15
drone set
...drone set 3dexport drone set made using the syma brand<br>step file and rhino file...
3d_export
$22
Exhibition Stand 3D Model
...3d model 3dexport exhibition stand stande project trade show syma spot lamp pal wood chair armchairs table exhibition stand...
thingiverse
free
Syma x6 central part
...syma x6 central part
thingiverse
replacement of center part for quadrocopter syma x6
thingiverse
free
Syma's s107 tail by NAR74
...syma's s107 tail by nar74
thingiverse
tail for syma s107 and analogs.
thingiverse
free
Protective casing - Syma X5SC by franckarts
...protective casing - syma x5sc by franckarts
thingiverse
this is a protective casing for the syma x5sc
thingiverse
free
Syma X5C Foot by Thinkibot
...5c foot by thinkibot
thingiverse
replacement feet for syma x5c quadcopter. if made from abs the
approximate weight is 3.6 grams.
thingiverse
free
Syma x5sw gopro mount by Joshua_J
...syma x5sw gopro mount by joshua_j
thingiverse
this is an adapter for the stock camara of the syma x5sw to a gopro / sjcam
thingiverse
free
Syma X8C SJCAM Mount by WeSo
...syma x8c sjcam mount by weso
thingiverse
sjcam mount for a syma x8c quadcopter modified with 3,2mm between partition.
thingiverse
free
Battery case with charger for Syma X5C by Habishek
...battery case with charger for syma x5c by habishek
thingiverse
battery case with charger for syma x5c
Aio
turbosquid
$59
eGo Aio
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
AIO table bench chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$59
VRay Building Materials S02 - AIO for C4D
... with vray building materials s02 materials library for cinema 4d. this is all in one material library for my building materia...
3d_ocean
$19
10 x Hi-Res Porcelain Textures - AIO
...f my series of 10 floral porcelain/ceramic textures. all textures are hi-res custom made textures and can be used for ceramic,...
3d_ocean
$19
25 Standard Liquids Materials Pack AIO for C4D
...is all-in-one material library of my series of 2 cinema 4d standard liquid materials series. it contains 25 standard liquid ma...
turbosquid
$39
E3D - HP Elite One 1000 G1 AiO 34 inches model
...1000 g1 aio 34 inches model for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1245758)
3d_ocean
$30
121 Standard Ground/Terrain Materials-AIO for C4D
...n: this is all-in-one material library of my series of 8 cinema 4d standard ground/terrain materials series. it contains 121 s...
3d_ocean
$55
Standard Clothes Material Pack-AIO for Cinema 4D
...ll-in-one material library of my series of 6 cinema 4d standard clothes materials libraries. it contains 94 standard cloth mat...
3d_ocean
$89
171 Standard Stone Materials Pack AIO for C4D
...s all-in-one material library of my series of 10 cinema 4d standard stone materials library series. it contains 171 standard s...
3d_ocean
$75
114 Standard FX Materials Pack AIO for Cinema 4D
...ll-in-one material library of my series of 8 cinema 4d standard fx materials series. it contains 114 standard fx materials. i ...
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)