Thingiverse
Foxy YARB: Fresh RAMPS Box! by jrobertfox
by Thingiverse
Last crawled date: 4 years, 7 months ago
Here is a clean and versatile box in which to put your ramps controller. Includes a solid top that fit's into the top of the box. My thought is to have either one fan blowing in and the other out, or a fan in and a vent out.
2x 40mm Fan openings
4x 1/2 wiring holes (sized to fit 3/8" rubber grommets)
4x Relay holders (For a relay to control lights, fans, whatever.)
Mounting tabs to use as you see fit. (The included "feet" adapt the mounting tabs to the holes on the back of the LIHUA-360W power supply.)
There are recesses for 3 nuts on the bottom, you will need 3x 3mm by 23/24mm screws to hold down the ramps
2x 40mm Fan openings
4x 1/2 wiring holes (sized to fit 3/8" rubber grommets)
4x Relay holders (For a relay to control lights, fans, whatever.)
Mounting tabs to use as you see fit. (The included "feet" adapt the mounting tabs to the holes on the back of the LIHUA-360W power supply.)
There are recesses for 3 nuts on the bottom, you will need 3x 3mm by 23/24mm screws to hold down the ramps