Thingiverse
Forerunner 245 Bicycle Clamp, 22mm, by Kowitzki
by Thingiverse
Last crawled date: 5 years, 2 months ago
Additional Items:
M4x20 Screw (a bit longer/shorter should also work)
M4 Nut (if possible with locking, nylon, all-metal or locktite)
Printing:
I printed it with one side laying down, so the clamping force wouldnt seperate layers. Unfortunately the down side looks bad because of the support.
As most printers tend to expand parts horizontally by about 0,1mm i created a file which should work for most, named:
"Forerunner245BicycleClamp".
However, if your printer is printing parts exactly to dimensions you can use the file named:
"Forerunner245BicycleClampExact".
M4x20 Screw (a bit longer/shorter should also work)
M4 Nut (if possible with locking, nylon, all-metal or locktite)
Printing:
I printed it with one side laying down, so the clamping force wouldnt seperate layers. Unfortunately the down side looks bad because of the support.
As most printers tend to expand parts horizontally by about 0,1mm i created a file which should work for most, named:
"Forerunner245BicycleClamp".
However, if your printer is printing parts exactly to dimensions you can use the file named:
"Forerunner245BicycleClampExact".