Thingiverse
Foof's Fan Buddy for Ender3 Rear electronics case by Foof
by Thingiverse
Last crawled date: 4 years, 4 months ago
Wanted to utilize a spare 50x15 blower fan I had to blow air through the open extrusion cutout from the original cable passthrough.
Also wanted a good place to tie-up & hide my spare camera cable.
This serves both purposes, with a friction fit 50x15 Fan location, wire management for the Fan, LCD, and Camera cables, and covering up the original cutout using original electronics case hardware & mounting points.
I printed and use Revision 6, but i added a few extra nice bits, and made the zip-tie points for the cables more usable.
Also wanted a good place to tie-up & hide my spare camera cable.
This serves both purposes, with a friction fit 50x15 Fan location, wire management for the Fan, LCD, and Camera cables, and covering up the original cutout using original electronics case hardware & mounting points.
I printed and use Revision 6, but i added a few extra nice bits, and made the zip-tie points for the cables more usable.