Thingiverse
Folger Tech FT-5 part cooling fan blower duct for 713Maker alu X carriage, e3d titan extruder, heat sink, volcano hot end by 3DGenera
by Thingiverse
Last crawled date: 4 years, 4 months ago
The remix here is a bit different. I really wanted something that attached to the two screws in the bottom H brace of the 713Maker aluminum X carriage for the FT-5. I also wanted something relatively easy to print. Using onebaldman's original 40mm and 50mm bracket I was able to extend my own adjustable-position duct that attaches to a very solid base bolted to the aluminum. After about twenty or so revisions and tests this is what I ended up with. It all would have been 100x harder to do without the original 40mm and 50mm brackets.