Thingiverse
Folding Nintendo Switch case V2.0 (READ DESCRIPTION) by Sleepless_Engineer
by Thingiverse
Last crawled date: 4 years, 3 months ago
I know it's currently top-heavy. The gap in the middle is there because the charging cable plugs into the bottom of the Switch. The reason it's so thick is because there needs to be room for the joysticks when it's folded.
This my first design to be featured on tech articles:https://www.htxt.co.za/2018/10/22/3d-print-turns-the-nintendo-switch-into-a-clamshell-console/
http://www.nintendolife.com/news/2018/10/random_wish_your_switch_was_more_like_a_3ds_then_3d_print_your_own_folding_flip_case
Print at 20% infill with 0.15mm resolution.
Buy two 2mm or 2.5mm diameter metal rods for the hinges, cut to 73mm length.
This my first design to be featured on tech articles:https://www.htxt.co.za/2018/10/22/3d-print-turns-the-nintendo-switch-into-a-clamshell-console/
http://www.nintendolife.com/news/2018/10/random_wish_your_switch_was_more_like_a_3ds_then_3d_print_your_own_folding_flip_case
Print at 20% infill with 0.15mm resolution.
Buy two 2mm or 2.5mm diameter metal rods for the hinges, cut to 73mm length.