FMS Atlas 6x6 Flatbed by aatimm87

Last crawled date: 3 years, 1 month ago

Flatbed with guard cage for an FMS Atlas 6x6 that provides a cool new look yet maintains the ability for high performance. Thanks to TheDIYGuy999 and another unknown designer for providing the files for the remix mash-up!
This is best printed cage side against the bed to minimize access and strengthen the cage. Yes, supports are needed but a vertical print should minimize these as well.
Mounts to stock chassis with stock bed mount pounds my either drilling out screw holes or using adhesive to secure the bed. Shock mount locations have be cut out to be used with shock position in forward- and upward-most position. Stock LED tail lights are designed to work with this once the stock enclosures are removed. May need to drill out the holes slightly depending on printing tolerance and shrinkage.
This is still a work in process so it's not 100% clean underneath so feel free to adjust as needed.
As a reminder, support your fellow designers and printers. These files and prints from these files are not intended to be sold for a profit. That ruins it for all hobbyists.