Thingiverse
FM Receiver Module Faceplate by biocode
by Thingiverse
Last crawled date: 3 years ago
This is a face plate for a widely available FM radio receiver module. I made this to bolt to the front of a larger device; but I have included a small box to house it temporarily. If you are here, you probably already have one but just in case, the module is available from a myriad of sellers on ebay and the ususal sources. I bought mine on ebay but for reference here is a link to aliexpress.
The CAD files are available at Onshape for you to customize.
The module is held in place with 3mmx8 screws. The back is designed to use 3mm thread brass inserts.
The back has a hole for a 4mm or 8-32 screw to attach an antenna. (However you may find you don't even need to add an antenna.) There are large access holes on the sides for the usb cable and audio jack. Note that the cables thread through the sides to plug into the board on the inside. Not all cables will fit.
BTW This little guy works really well!
The CAD files are available at Onshape for you to customize.
The module is held in place with 3mmx8 screws. The back is designed to use 3mm thread brass inserts.
The back has a hole for a 4mm or 8-32 screw to attach an antenna. (However you may find you don't even need to add an antenna.) There are large access holes on the sides for the usb cable and audio jack. Note that the cables thread through the sides to plug into the board on the inside. Not all cables will fit.
BTW This little guy works really well!
Similar models
thingiverse
free
Turnigy 9x hf module antenna mount by Chameo
...in you removed the label from
put the module back in place and mount the cap onto the old antenna's hole
you're done!
cults
free
eTurbine TB250 antenna support
...e existing holes on the chassi
the pivot is formed by a nylon screw m5
to keep the antenna wire, i use a straw cut lengthwise
thingiverse
free
Receiver Mount Futaba R7008SB by svthomsen
...especially for a futaba r7008sb. the holes in the top are for antenna-tubes and the hole in the back is for the ext-voltage cable
thingiverse
free
eTurbine TB250 antenna support by boxplyer
... the existing holes on the chassi
the pivot is formed by a nylon screw m5
to keep the antenna wire , i use a straw cut lengthwise
thingiverse
free
Magnetic Cable Manager by ICEMANJenson
... magnets 4x ø10x3mm and the hole for the screw is 3.5mm so i used a 3x16mm screw.
the holes for the cables have a diameter of 6mm
thingiverse
free
FrSky X4R(-SB) receiver mount for Vortex 250 by DiAleksi
...side. this will minimize a risk of antennas ripping into the propellers during the crash. print with support for antenna holders.
thingiverse
free
OrangeRx transmitter antenna mount by Scorpio9999
...e back to pcb.
return back cover in place and screw it.
you are done!
first mount module in transmitter then screw antenna on it.
grabcad
free
Tecsun AN-200 AM FM Radio Loop Antenna
... available from ebay and other sources. the teardown is here : http://www.antiqueradios.com/forums/viewtopic.php?f=2&t=261183
thingiverse
free
Martian II 220mm Parts (Unify antenna mount, Standoff mounter) by majorrom
...nt my gigantic and ancient pwm receiver while at the same time allowing my xt60 connector to come out the back of the quadcopter.
thingiverse
free
Eachine EV100 Receiver Case Mod by raab6
... curve of the google good enough and to have the holes at the right position for the antenna and control wheel.
hope you like it.
Biocode
thingiverse
free
screw mount ziptie anchor by biocode
...de
thingiverse
this is a little larger than the original and has an opening for a #6 screw as alternative means of fastening it.
thingiverse
free
Rogue keypad by biocode
... on github
the cad files are available on onshape
the keycaps shown were sla printed using the excellent keyv2 by rsheldiii .
thingiverse
free
Remix Butchers Thumb Burger Press by biocode by beikeland
...ew fillets for strength & aesthetics.
not tested for compatability yet. .step files included. walls designed for 0.4mm nozzle
thingiverse
free
Customizable Seven Segment by biocode
...u should generate your own from the openscad files.
this thing can be used as-is as a sign or incorporated into other designs.
thingiverse
free
Direct Drive 28BYJ-48 by biocode
...ght, this motor is suitable for very light duty only.
read the instructions for some important considerations before making this.
thingiverse
free
Wybae Extruder Mount for MPCNC by biocode
...http://www.thingiverse.com/thing:1634262
i printed it in pla with 50% infill.
the photos also show a fan mount not included here.
thingiverse
free
Travel Shaker by biocode
...y print used with consumables, you should use food-safe material in printing and assembly.
the cad files are available on onshape
thingiverse
free
LedCube Base by biocode
...ted this with natural pla (semi transparent) so the leds on the bottom could shine through.
the cad files are available ononshape
thingiverse
free
Tall Tank Strainer by biocode
...also printed the whole thing larger at 109%.
any "likes" this happens to generate should go to the original by area51.
thingiverse
free
Credit Card Wallet Remix by biocode
...he parts from the original are presumably not interchangeable with this design. i did not attempt to copy his dimensions exactly.
Faceplate
turbosquid
$4
Oil fitting faceplate
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
faceplate by lwoowllwoowl
...faceplate by lwoowllwoowl
thingiverse
faceplate
thingiverse
free
faceplate remix by lwoowllwoowl
...faceplate remix by lwoowllwoowl
thingiverse
faceplate remix
thingiverse
free
faceplate by mbot3d
...plate by mbot3d
thingiverse
this is a faceplate designed with proe.
the part photo showed is printed using our 3d printer, mbot.
thingiverse
free
Gingery Faceplate by NothingComplicated
...gingery faceplate by nothingcomplicated
thingiverse
the gingery faceplate pattern with draft where needed for sandcasting.
thingiverse
free
Wordclock faceplate by danowall
...eways.com/product/lm5ke6je3/wristwatch-faceplate-helveticahttps://www.shapeways.com/product/6lgvb53sy/wordclock-faceplate-stencil
thingiverse
free
XBox SD616T Faceplate Adapter
... modified to work in an original xbox. this faceplate adapter will allow the drive to carry the standard original xbox faceplate.
thingiverse
free
Anycubic faceplate by MY3MAGS
...anycubic faceplate by my3mags
thingiverse
go to allnthefam.com for a chance to win a $50 amazon gift card.
delta faceplate
thingiverse
free
GamePi20 Faceplate by ShoesForClues
...faceplate by shoesforclues
thingiverse
a faceplate for the waveshare gamepi20 which has a proper d-pad and non spinning buttons.
thingiverse
free
Huntron 1000 Faceplate by 360alaska
...huntron 1000 faceplate by 360alaska
thingiverse
replacement faceplate for huntron 1000
Fm
3ddd
free
FM Bottega
...tega
3ddd
fm bottega , комод
модель комода фабрики fm bottega на заказ art.600 + art.604
3ddd
$1
Кухня FM bottega
...кухня fm bottega
3ddd
fm bottega
классическая кухня fm bottega
3ddd
$1
FM Actual
...ель - fm bottega d'arte. cайт производителя и коллекция -http://www.fmarte.it/page.jsp?idpagina=416
автор - lepan
turbosquid
$8
FM-DK08_Desk
... free 3d model fm-dk08_desk for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1252060)
turbosquid
$8
FM-NS08_Nightstand
...3d model fm-ns08_nightstand for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1251766)
turbosquid
$3
Table FMS
...lty free 3d model table fms for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1661256)
3ddd
$1
Ibanez SA260 fm
...ibanez sa260 fm
3ddd
ibanez , гитара
модель гитара ibanez sa260 fm
turbosquid
$20
fm-njop.lwo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
fm-rjop.lwo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$18
FM-180 Armchair
...fm-180 armchair
designconnected
fsm fm-180 armchair computer generated 3d model. designed by heiliger, stefan.
Receiver
archibase_planet
free
Receiver
...receiver
archibase planet
receiver receiving set radio set
receiver n170311 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Receiver
...receiver
archibase planet
receiver equipment
receiver - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Receiver
...receiver
archibase planet
radio tuner receiver
receiver n120108 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Receiver
...receiver
archibase planet
receiver denon
denon avr3805- 3d model for interior 3d visualization.
turbosquid
$62
RECEIVER
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Receiver
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$6
Receiver for 20m3
...receiver for 20m3
3dexport
receiver for 20m3 of compressed air
archive3d
free
Receiver 3D Model
...iver receiving set radio set
receiver n170311 - 3d model (*.3ds) for interior 3d visualization.
3d_ocean
$6
DVD Receiver
...yer. can also be used as a receiver. original design dvd player or stereo design with exceptional detail. dvd receiver 3d models.
3d_ocean
$25
Television receiver
...cial plugin needed to open scene. - correctly scaled accurate representation of the original objects. - model is all materials...
Module
turbosquid
$4
Module
...
turbosquid
royalty free 3d model module for download as max on turbosquid: 3d models for games, architecture, videos. (1259603)
3d_export
free
Martian module
...martian module
3dexport
martian module objects 18 textures are missing
design_connected
$39
Kennedee Moduls
...kennedee moduls
designconnected
kennedee moduls computer generated 3d model. designed by massaud, jean-marie.
design_connected
$39
Sayonara Moduls
...sayonara moduls
designconnected
bbb emmebonacina sayonara moduls computer generated 3d model. designed by decursu, giorgio.
design_connected
$27
Togo Moduls
...togo moduls
designconnected
ligne roset togo moduls computer generated 3d model. designed by ducaroy, michel.
design_connected
$34
Nuvola Moduls
...nuvola moduls
designconnected
bonaldo nuvola moduls 2-seater computer generated 3d model. designed by giuseppe viganò.
3d_export
free
Hibernation module
...hibernation module
3dexport
design_connected
$27
Sabi moduls
...sabi moduls
designconnected
paola lenti sabi moduls 2-seater computer generated 3d model. designed by francesco rota.
3d_export
$50
pls concrete module
...pls concrete module
3dexport
pls concrete module<br>pls with concrete mobile mixer module m5
turbosquid
free
Hibernation module
...squid
free 3d model hibernation module for download as blend on turbosquid: 3d models for games, architecture, videos. (1667696)