Flysky Noble NB4 Battery Sleeve with magnetic sled (Arrma Edition)

Last crawled date: 5 years, 4 months ago

This is a protective sleeve for the Flysky Noble NB4 battery sled. I made this to protect the aluminum from getting dinged up. It's a tight fit due to the little nibs that lock the battery into place. You may have to stress your part a bit to get the battery to slide in. I had no issues doing this. Otherwise you could just sand one of the nibs down a little
Also added mounts for 8mm x 3mm magnets on the sled. Tight fit but i'd prob glue them in if you plan on using them. You can stick it to a car hood or it's also a good way to pick up loose screws and parts out in the field. so basically doubles as a magnetic pickup tool
You also may need supports for the small nibs.. it's very small section if so take your chances if you have a good printer.