Thingiverse
Flying Fish HSP 94123 RWD conversion kit by Tick007
by Thingiverse
Last crawled date: 4 years, 6 months ago
This is front steering block for HSP Flying Fish 94123. It replaces first diff. Models that have "_reinforcer" must be printed and glued with main part (printed with ABS, glued with acetone solute).
steering_plank_center, stand_v5, and some others must be printed mirrowed too.
Work still in progress, compatibility of old and updated parts is not guaranteed (some of the parts may not match, please leave a comment).
To make it work you need some not printed parts:
10mm(or 12mm) m3 stands: https://aliexpress.ru/item/5-10pcs-aluminum-spacer-m2-m2-5-m3-M4-M5-m6-round-Aluminum-Standoff-rods-For/1005001696477482.html
Thrust ball bearings 10x5x4mm: https://aliexpress.ru/item/10Pcs-F5-10M-F5-11M-F5-12M-High-Speed-Thrust-Ball-Bearing-Miniature-High-Accuracy-Flat/4000219380179.html
Some m3 screws and nuts.
2x14mm (or 12mm) m2.5 screws (hidden head) and nuts. 1x20-25mm m2.5 and nut.
I reccommend to use alu frame (https://aliexpress.ru/item/RC-Model-Car-1-10-Aluminum-Alloy-Base-Plate-03001-03062-94103-94123-Chassis/1005001411019486.html). It already has mounting holes in the center to mount servo (with servo_corner.stl). When using plastic frame you have to drill holes yourself.
Front shock tower you can get there: https://aliexpress.ru/item/1-PCS-HSP-102022-02035-Aluminum-Front-Shock-Tower-RC-Accessory-Part-1-10-Upgrade-Parts/4001059402765.html. Stock plastic will also work but it is not hard enouth.
steering_plank_center, stand_v5, and some others must be printed mirrowed too.
Work still in progress, compatibility of old and updated parts is not guaranteed (some of the parts may not match, please leave a comment).
To make it work you need some not printed parts:
10mm(or 12mm) m3 stands: https://aliexpress.ru/item/5-10pcs-aluminum-spacer-m2-m2-5-m3-M4-M5-m6-round-Aluminum-Standoff-rods-For/1005001696477482.html
Thrust ball bearings 10x5x4mm: https://aliexpress.ru/item/10Pcs-F5-10M-F5-11M-F5-12M-High-Speed-Thrust-Ball-Bearing-Miniature-High-Accuracy-Flat/4000219380179.html
Some m3 screws and nuts.
2x14mm (or 12mm) m2.5 screws (hidden head) and nuts. 1x20-25mm m2.5 and nut.
I reccommend to use alu frame (https://aliexpress.ru/item/RC-Model-Car-1-10-Aluminum-Alloy-Base-Plate-03001-03062-94103-94123-Chassis/1005001411019486.html). It already has mounting holes in the center to mount servo (with servo_corner.stl). When using plastic frame you have to drill holes yourself.
Front shock tower you can get there: https://aliexpress.ru/item/1-PCS-HSP-102022-02035-Aluminum-Front-Shock-Tower-RC-Accessory-Part-1-10-Upgrade-Parts/4001059402765.html. Stock plastic will also work but it is not hard enouth.