Flying Extruder mount for Anycubic Kossel Plus Linear by Speedyturtle

Last crawled date: 3 years, 2 months ago

Extension to mount a Flying Extruder onto Anycubic Kossel Plus Linear.
Designed in two parts. Just unscrew the two arms from the gantry and pull over both parts. Fix the parts with a M4x20mm screw + nut. The screw serves as stage for rubber band, silicon tube, spring, ...
Flying extruder:
+++ reduced retract and depending parameters
---- more weight on the printhead therefore more inertia --> ghosting
I am using a TitanExtruder with my counterweighted Flying Titan mount thing:3413801 (https://www.thingiverse.com/thing:3413801) with springs mounted to the flying extruder mount.
The light pancake stepper + the counterweight are responsible for fully eleminating ghosting, even at printing moves of 100mm/s.
So - Counterweighted Flying extruder:
+++ reduced retract and depending parameters
+++ almost no weight (when counterweight is choosen well)on the printhead therefore less inertia --> eleminates ghosting