Flyback G07 Template by SCUBAKING3D

Last crawled date: 4 years, 8 months ago

For anyone who is doing maintenance on an old CRT G07 Monitor and replacing the Flyback, sometimes you need to bend the pins to get it to drop into the board easier. This is very hard through trial and error with the actual PCB so I made this template instead. If you bend the pins on the Flyback to fit these holes, it should drop right onto the PCB.
This was build for and checked to work perfectly with a G07-CBO monitor, This uses the A29951B flyback. Pinout may work for others, but I have no way of testing or comparing.
Good Luck, hope this helps!