Thingiverse
Fly Fishing Reel by sthone
by Thingiverse
Last crawled date: 3 years ago
This is a simple fly fishing reel I designed for myself a few years ago but am posting it by request.
I've used a few versions of it for everything from bass to panfish and I actually used one to catch my first trout (on a fly) with it. (see picture)
The reel does use a few bits of non printed hardware.
Hardware Required
(1) 10-32 x 1" Socket Head Screw and Nut
(1) 4-40 x 1/2" Flat Head Screw
(3) 1/4" X 1" Fender Washers (Lowes - Item # 136616 Model # 880342)
(1) Spring & Ball (optional)
See exploded diagrams for assembly.... I don't have time to do a full write up right now but here's some misc. info I remember.
The spool halves get super glued together.
The fender washers act like a bearing and make it the reel spin more freely. (I tried a thrust bearing but it really wasn't worth it.)
This is a Click and Pawl design reel - The spring and ball for the clicker can be a Pen Spring and a BB but they will rust over time. I used a .186" chrome ball (Honda Motorcycle Part# 96211-06000) I also used a cut down stainless steel spring I found locally. Use a small Allen wrench to press the spring and ball into the hole while pressing the spool down. It's a little tricky but not impossible. :)
You can use the printed clicker (not show in the pictures) it clips right in the bottom cut out of the spool post on the reel frame. I don't remember which stl version I went with or what the printer settings I used were so I included a bunch of different versions with different sized nubs I was testing so you can play around with them if you want.
The hole for the spool bolt was left small and tapped with a 10-32 tap but you can probably just force the screw in.
The nut for the spool is embedded into the actual thumb knob during printing and requires a thin nut. (I used a 18-8 Stainless Steel Thin Nylon-Insert Locknut from Mcmaster Item# 90101A225) You could probably just use a nut and washer but seeing it's used to set the drag of the reel (so to speak as it is just a Click and Pawl design) it might be hard to adjust in the field without a tool if you went that route.
Updated 7-29-17 with a thumb knob that shoudl work with a full sized nut.
Fly_Reel_Thumb_Knob_Final.STL uses a Thin Nylon-Insert Locknut with with these specsFly Reel Thumb Knob Full Size Nut.STL uses a full sized Nylon-Insert Locknut with with these specs
For drag after hook up it was designed so you can also just use your hand on the out spool edge to control the drag if need be.) I've never caught anything big enough yet to worry about it though.
See http://imgur.com/a/da9rE for a few more pictures I took during the design process.
Anyway that's it for now if you try to print this and have any questions.. ask and I'll try to answer them.
Enjoy..................
I've used a few versions of it for everything from bass to panfish and I actually used one to catch my first trout (on a fly) with it. (see picture)
The reel does use a few bits of non printed hardware.
Hardware Required
(1) 10-32 x 1" Socket Head Screw and Nut
(1) 4-40 x 1/2" Flat Head Screw
(3) 1/4" X 1" Fender Washers (Lowes - Item # 136616 Model # 880342)
(1) Spring & Ball (optional)
See exploded diagrams for assembly.... I don't have time to do a full write up right now but here's some misc. info I remember.
The spool halves get super glued together.
The fender washers act like a bearing and make it the reel spin more freely. (I tried a thrust bearing but it really wasn't worth it.)
This is a Click and Pawl design reel - The spring and ball for the clicker can be a Pen Spring and a BB but they will rust over time. I used a .186" chrome ball (Honda Motorcycle Part# 96211-06000) I also used a cut down stainless steel spring I found locally. Use a small Allen wrench to press the spring and ball into the hole while pressing the spool down. It's a little tricky but not impossible. :)
You can use the printed clicker (not show in the pictures) it clips right in the bottom cut out of the spool post on the reel frame. I don't remember which stl version I went with or what the printer settings I used were so I included a bunch of different versions with different sized nubs I was testing so you can play around with them if you want.
The hole for the spool bolt was left small and tapped with a 10-32 tap but you can probably just force the screw in.
The nut for the spool is embedded into the actual thumb knob during printing and requires a thin nut. (I used a 18-8 Stainless Steel Thin Nylon-Insert Locknut from Mcmaster Item# 90101A225) You could probably just use a nut and washer but seeing it's used to set the drag of the reel (so to speak as it is just a Click and Pawl design) it might be hard to adjust in the field without a tool if you went that route.
Updated 7-29-17 with a thumb knob that shoudl work with a full sized nut.
Fly_Reel_Thumb_Knob_Final.STL uses a Thin Nylon-Insert Locknut with with these specsFly Reel Thumb Knob Full Size Nut.STL uses a full sized Nylon-Insert Locknut with with these specs
For drag after hook up it was designed so you can also just use your hand on the out spool edge to control the drag if need be.) I've never caught anything big enough yet to worry about it though.
See http://imgur.com/a/da9rE for a few more pictures I took during the design process.
Anyway that's it for now if you try to print this and have any questions.. ask and I'll try to answer them.
Enjoy..................
Similar models
cults
free
Ultralight Fly Fishing Reel
...th a 10-32 tap. (you can probably just force the screw in but it might crack.) the handle pin was also tapped for the 4-40 screw.
thingiverse
free
Ultralight Fly Fishing Reel by sthone
... time uploading my designs and if you like what you see check out more of my stuff at https://www.theneverendingprojectslist.com/
cults
free
Fly Fishing Reel
...'s it for now if you try to print this and have any questions.. ask and i'll try to answer them.
enjoy..................
3dwarehouse
free
locknut, thin, nylon insert, no. 10, McMaster-Carr 97367A112
...ut, thin, nylon insert, no. 10, mcmaster-carr 97367a112
3dwarehouse
locknut, thin, nylon insert, no. 10, mcmaster-carr 97367a112
thingiverse
free
CR-10S Locking Bed Leveling Knob by SamHain07
... with a screwdriver). then replace the springs. insert the remaining m4 locknuts into the wheels and thread them on - wala!"
3dwarehouse
free
locknut, thin, nylon insert, #8-32, McMaster-Carr 90101A009
...knut, thin, nylon insert, #8-32, mcmaster-carr 90101a009
3dwarehouse
locknut, thin, nylon insert, #8-32, mcmaster-carr 90101a009
thingiverse
free
Realistic Fly Fishing Reel by Juliano85
...ces before gluing. a washer or o-ring could be added under the centre pin screw to add more drag. i did not require it.
have fun!
3dwarehouse
free
M5_Nylon_Nut
...ngent guidelines what is included (10) nylon insert hex locknut – m5 product specifications m5 alloy steel color: silver or black
thingiverse
free
Knob for 1/4" Nut by Makify1
...allows a bolt or threaded rod to pass through the knob. you'll probably want to use a 1/4" washer with the knob as well.
3dwarehouse
free
Bolt, Washer, Wing Nut, Spring, Threaded Insert and T-Nut - 1/4'
...rt and t-nut - 1/4'
3dwarehouse
bolt, washer, wing nut, spring, threaded insert and t-nut - 1/4' (drawn with sketchup 8)
Sthone
thingiverse
free
Wire Exits by sthone
...wire exits by sthone
thingiverse
computer wire exits for use with 3/4" plywood.
thingiverse
free
Motherboard Stand Off by sthone
...motherboard stand off by sthone
thingiverse
standoff for a mounting a motherboard to a flat surface.
thingiverse
free
External Hard Drive Mount by sthone
...e mount by sthone
thingiverse
this is a simple mount i used to mount an external hard drive (rosewill rx35-at-iu) under my desk.
thingiverse
free
Mini Crossbow by sthone - Remixed for springs by TH3D
...w.youtube.com/watch?v=b0uxetiqkje
get the iron sights / bolt holder here:https://www.thingiverse.com/thing:1021002
(just glue it)
thingiverse
free
Makergear M2 Extended Spool Arm by sthone
...thingiverse
extended spool holder for the makergear m2 printer.
this is a .95" lengthened version of the original holder.
thingiverse
free
Aerosol Straw Saver by sthone
... will save it (if it pops out of the nozzle) from shooting across the room and under that void that seems to exist in every shop.
thingiverse
free
Iron sights and bolt holder for sthone's crossbow by TH3D
...d bolt holder for sthone's crossbow by th3d
thingiverse
makes aiming easier, and also holds the arrow / bolt firmly in place
thingiverse
free
3D Printed Clock by sthone
...ent but everything else was printed on a makegear m2.
time lapse of it in action - https://www.youtube.com/watch?v=kcvprbovcnu
thingiverse
free
Insulin Bottle Holder by sthone
...m the light every time the refrigerator door is opened. not sure if it will prolong things but it keeps the bottle stable anyway.
thingiverse
free
Makergear M2 Single V4 Extruder Fan Shroud by sthone
...m2 single v4 extruder fan shroud by sthone
thingiverse
this is a simple fan shroud for the single v4 extruder on a makergear m2.
Reel
turbosquid
$75
Reel to Reel Player
...d model reel to reel player for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1298497)
turbosquid
free
Technics Reel to reel rs1700
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$115
Reel To Reel Untextured 3D Model
...t
audio teac analog to studio recording recorder music spindle reel tape
reel to reel untextured 3d model plutonius 1633 3dexport
design_connected
$16
Reel
...reel
designconnected
b&b italia reel computer generated 3d model. designed by atelier oi.
3d_export
$9
Classic Reel To Reel Projector 3D Model
...classic reel to reel projector 3d model
3dexport
array
classic reel to reel projector 3d model fdawg 31580 3dexport
turbosquid
$10
Old School Reel to Reel Deck
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Akai GX-636D Reel to reel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
reel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$170
Teac 5500 Reel to Reel Player 3D Model
...oteac analog reel to studio recording recorder music spindle tape
teac 5500 reel to reel player 3d model plutonius 18638 3dexport
cg_studio
$125
Teac 5500 Reel to Reel Tape Player3d model
...o
.3ds .max .obj - teac 5500 reel to reel tape player 3d model, royalty free license available, instant download after purchase.
Fishing
archibase_planet
free
Fish
...fish
archibase planet
fish aquarium fish toy fish
fish n250113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Fish
...fish
archibase planet
fish aquarium fish toy fish
fish n310113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Fish
...fish
archibase planet
fish aquarium fish
fish - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Fish
...fish
archibase planet
fish aquarium fish
fish - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$200
Fish Red | Fish 3D | Fish devil | Fish fat
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
free
fish
...fish
3dexport
fish
3ddd
$1
fish
...fish
3ddd
рыба
fish
archibase_planet
free
Fish
...fish
archibase planet
fish sculpture statue
fish - 3d model for interior 3d visualization.
archibase_planet
free
Fish
...fish
archibase planet
fish picturesque element
fish - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Fish
...fish
archibase planet
fish picturesque element
fish - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Fly
design_connected
$13
Fly-Fly
...fly-fly
designconnected
foscarini fly-fly computer generated 3d model. designed by palomba, ludovica.
3ddd
$1
Foscarini FLY-FLY
...foscarini fly-fly
3ddd
foscarini , fly-fly
foscarini fly-fly
полигонов: 73 022
3ddd
$1
Foscarini Fly-Fly
...foscarini fly-fly
3ddd
foscarini
люстра fly-fly
3d_export
free
fly
...fly
3dexport
fly
turbosquid
$15
fly fishing fly
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
free
Fly
...fly
designconnected
free 3d model of fly by alias designed by acerbis, marco.
turbosquid
$49
Fly Fly Maya Rig
...turbosquid
free 3d model fly fly maya rig for download as ma on turbosquid: 3d models for games, architecture, videos. (1182393)
design_connected
$13
Fly
...fly
designconnected
zanotta fly computer generated 3d model. designed by robson , mark .
design_connected
$13
Fly
...fly
designconnected
kartell fly computer generated 3d model. designed by laviani, ferruccio.
3d_ocean
$10
3D Fly
...3d fly
3docean
3d fly 3ds max fly
this is a 3d fly model.