Thingiverse
FLSUN QQ-S / QQ-S PRO SD Relocation Adapter by MatGyver85
by Thingiverse
Last crawled date: 3 years, 11 months ago
This adapter allows you to mount an MKS Slot2 SD card Extender into the shell of the QQ-S / QQ-S PRO.
Cut a 3mm x 40mm slot in the shell (I used a dremel with a cutting wheel, and a shop vac while cutting to extract all the metal dust)
Bolt the two support parts to the MKS Slot2 board using (2) M3x ~14mm bolts
Bolt the face plate to SD assembly through the 3mm x 40mm slot using (2) M3 x ~8mm bolts
Connect ribbon cable to control board header. No firmware mods needed.
Enjoy!
Cut a 3mm x 40mm slot in the shell (I used a dremel with a cutting wheel, and a shop vac while cutting to extract all the metal dust)
Bolt the two support parts to the MKS Slot2 board using (2) M3x ~14mm bolts
Bolt the face plate to SD assembly through the 3mm x 40mm slot using (2) M3 x ~8mm bolts
Connect ribbon cable to control board header. No firmware mods needed.
Enjoy!