FLSUN QQ S PRO HONEYCOMB ENGINE MOUNTS by EXERGYOUTDOORS

Last crawled date: 3 years, 3 months ago

These stepper motor brackets replace the 3d printed "dust" covers that are stock on the FLSUN QQ-S Pro models.
The motor brackets bend as the belts are tensioned or the print head changes direction quickly. These mounts prevent the motors from moving and provide solid and consistent tension on the belts.
Please note:
*There are some QQ-S models that have a different gap between the stepper and the frame. I have included two different sizes for the two different gaps that I am aware of.
*Please measure the distance between the face of the stepper and the tangent of the frame corners to determine which mounting block you need.
This is a remake that allows for ample clearance of the stepper gear set screws and a full stab depth support system that sits flush with the bottom of the frame. I honeycombed this out for vibration damping, strength, and optimized for easy printing with a 0.4mm or 0.8mm nozzle at any layer height you chose.
Flip the model 180 degrees to print.
I will update as needed.
STEP file included for those that need to modify.