FLSun QQ RepRapDiscount Full Graphic Smart Controller frame by Av8er

Last crawled date: 3 years ago

I was tired of the limitations of the MKS TFT display so I wanted to get a standard LCD for access to the menus. I did not want to reinvent the wheel so I used this case from ZilDV .
Remove the MKS TFT from the QQ and install and assemble as per pictures.
Materials: 4 M3x10, 4 M3x30(depending on how thick your display ends up), 8 M3 Nuts(if you strip the plastic)
RepRapDiscount full graphic smart controller Display. Amazon US Link (This is the one I bought but it has the upside down connectors)
I designed tolerances for tapping the holes with a M3 tap, if your going to use nuts drill them out to 3mm.
Note for ZilDV case: The design is based on a version of the board that has a removable display. Most now are soldered to the board. I printed the middle section up to a height of 3.3mm and stopped the print, at that thickness it fit perfectly between the two PCB's and the case halfs.
Note for LCD: Some boards have the connectors installed upside down if the display does not work this is probably why. Easy fix, google it...