Thingiverse
FLSUN-G Corexy Adapter For NF TC-01 2in 1out Hotend
by Thingiverse
Last crawled date: 5 years, 10 months ago
You can use this adapter to mount The NF TC-01 2in1out and keep your original x-carriage for the FLSUN-G Corexy, Mine had the metal x-carriage plate that I wanted to keep.
You will also need 2 Head Cap M4*10 screws w/nuts for mounting to the x-carriage. Ensure the nuts dont rub on the carriage frame on the back.
Screw the 2 M4*10 screws through the adapter. Do not drill or enlarge the holes as they will need to be tight to hold the screws in place while you tighten the nuts from the back.
Mount the NF TC-01 Hotend to the adapter.
Mount the adapter to the x-carriage with the nuts.
You will also need 2 Head Cap M4*10 screws w/nuts for mounting to the x-carriage. Ensure the nuts dont rub on the carriage frame on the back.
Screw the 2 M4*10 screws through the adapter. Do not drill or enlarge the holes as they will need to be tight to hold the screws in place while you tighten the nuts from the back.
Mount the NF TC-01 Hotend to the adapter.
Mount the adapter to the x-carriage with the nuts.