Thingiverse
Flow (E multiplier) Calibration Cube Shape
by Thingiverse
Last crawled date: 6 years, 7 months ago
20x20x20 cube type shape includes:
10mm radius on one corner
45 deg chamfer on one corner
45 deg overhang
cutout in floor.
walls have 0.8 mm thickness
base is 1.0 mm thick
I used it to calibrate my flow settings as well as z steps.
Nice step by step here by e3d:https://e3d-online.dozuki.com/Guide/Flow+rate+(Extrusion+multiplier)+calibration+guide./89
I measured all 4 flats and center of the radius then averaged the value.
10mm radius on one corner
45 deg chamfer on one corner
45 deg overhang
cutout in floor.
walls have 0.8 mm thickness
base is 1.0 mm thick
I used it to calibrate my flow settings as well as z steps.
Nice step by step here by e3d:https://e3d-online.dozuki.com/Guide/Flow+rate+(Extrusion+multiplier)+calibration+guide./89
I measured all 4 flats and center of the radius then averaged the value.