Thingiverse
Floss Analog Command Center - Remix by CesiumSalami
by Thingiverse
Last crawled date: 3 years, 4 months ago
This is a remix of a remix based originally on the Floss Command Center: https://www.thingiverse.com/thing:3704334
I had some changes that I wanted to make to the original Floss Command Center, and leveraged the step files from a remix.
Changes include:Different Zip Tie Mounts: Original zip tie mount remains, but newer ones made for smaller, but more zip ties.BN220 GPS Mount: Changed the top mount to be less of a platform and more of an enclosure for the BN220 specifically. Wedges in there well and then a bit of hot glue to tack it down for funzies.Center Nut Option: New space added to allow an M3 nut to be used to fasten the middle of the command center. With this in place... the zip ties almost seem unnecessary / redundant.10mm Standoff Mounts: The Floss is really a race frame and a ton of it's rigidity comes from the top plate. I dunno, it's probably pointless, but I wanted to use longer screws and have the interface between the top plate standoffs and screws be really solid and not fastened down against TPU. Probably pointless. 10mm was the standoff size I had and it a bit unnecessary - 5mm would be better - but i didn't have those around. Should be easy to remove this or shorten if not desired.Misc zip tie locations: some extra zip tie holes around.Top Plate Match for Floss: the bottom of the top plate is a near match for the floss now.Modded GoPro 8 Holder: GP8 holder has been slightly modded. It's a little bigger for a slightly looser fit and the tolerances on the command center have been reduced a bit to be tighter on the screws. It's also narrower. Original mounts should work just fine though.
Printed at mostly 100% until after the GP mount and which point i reduced the perimeters and infill a bit.
Built in supports on the GP mount. adding glue stick at interface layers is helpful!
I had some changes that I wanted to make to the original Floss Command Center, and leveraged the step files from a remix.
Changes include:Different Zip Tie Mounts: Original zip tie mount remains, but newer ones made for smaller, but more zip ties.BN220 GPS Mount: Changed the top mount to be less of a platform and more of an enclosure for the BN220 specifically. Wedges in there well and then a bit of hot glue to tack it down for funzies.Center Nut Option: New space added to allow an M3 nut to be used to fasten the middle of the command center. With this in place... the zip ties almost seem unnecessary / redundant.10mm Standoff Mounts: The Floss is really a race frame and a ton of it's rigidity comes from the top plate. I dunno, it's probably pointless, but I wanted to use longer screws and have the interface between the top plate standoffs and screws be really solid and not fastened down against TPU. Probably pointless. 10mm was the standoff size I had and it a bit unnecessary - 5mm would be better - but i didn't have those around. Should be easy to remove this or shorten if not desired.Misc zip tie locations: some extra zip tie holes around.Top Plate Match for Floss: the bottom of the top plate is a near match for the floss now.Modded GoPro 8 Holder: GP8 holder has been slightly modded. It's a little bigger for a slightly looser fit and the tolerances on the command center have been reduced a bit to be tighter on the screws. It's also narrower. Original mounts should work just fine though.
Printed at mostly 100% until after the GP mount and which point i reduced the perimeters and infill a bit.
Built in supports on the GP mount. adding glue stick at interface layers is helpful!
Similar models
thingiverse
free
Hyperlite Floss V2.1 Turtle Mode Fin by sweetjc
...er to the rear in order to fit a gopro session mount in front of the quad if needed.
hope this works out for you if you print it!
thingiverse
free
Floss v3, Turtle fin w/ able zip tie to top plate
...floss v3, turtle fin w/ able zip tie to top plate
thingiverse
floss v3, turtle fin w/ able zip tie to top plate
thingiverse
free
Foxeer Top-Mount for RealAcc X210 by Romout
...ard for better protection of the antenna. it's then also possible to use a zip-tie to keep the antenna close to the top-plate
thingiverse
free
Crossfire 2 Standoff for Top Plate and Gimbal Controller by VertexPrint
...r diameter: 10mm
drilling: 3mm
standoff top plate 30mm (mounting gimbal controller)
high: 30mm
outer diameter: 10mm
drilling: 3mm
thingiverse
free
Xiaomi Round Temperature and humidity Sensor Bracket for screw or zip-tie by JellyTitan
... flat bit at the top of the screw hole to make zip-tie mounting a little easier). i tried to minimize material usage on this one.
thingiverse
free
Floss 2.1 GoPro Session Mount (35 Degrees) by Airmaxx23
...h. please print this as it's shown in the render, no support are needed. this weighs 19 grams when printed with a 35% infill.
thingiverse
free
Drone GPS mount (Tyro129)
...it on an arm but there it was hit by a prop (this mount protected the gps module from the prop). now it's mounted on the top.
thingiverse
free
iFlight XL7 - TBS Unify / TBS Crossfire Micro receiver V2 mount by FPV_vibes
... to the gps mount for a more sting ray tail look under the props and i've had no problems since.
v4 = zip-tie mount removed.
thingiverse
free
QAV210 GoPro Mount by Mittens31
... of going through the back of the seat, since this causes the camera to sit on the zip-tie which can cause some annoying movement
thingiverse
free
Realacc Real4 Session Mount by EvokeFPV
... the original feet but everything else is different, this also uses the screw in the center of the frame, instead of the zip tie.
Cesiumsalami
thingiverse
free
Tiny Whoop Frame - Minimal by CesiumSalami
...signed to be printed in nylon, but should work in other filaments just fine.
should fine any standard tiny whoop board and props.
thingiverse
free
TX02 Model STL by CesiumSalami
... and is was super helpful. i'm happy to take down the design the creator wants to incorporate this stl file into their files!
thingiverse
free
2020 Was Dog Poop Ornament by CesiumSalami
...e dog ornament. step files included... but the models aren't fantastic as a result of me just converting .obj files to breps.
thingiverse
free
RealAcc X210 Pro ROUGH SKETCH of Base Plate by CesiumSalami
...2mm. i used that measurement and a photo to very roughly sketch this design. only use this as a guide - it's not definitive.
thingiverse
free
FR7 DJI Platypuss Triple SMA for BN220, Matek M8Q, TBS M8.2 by CesiumSalami
...giverse
remix of the dji specific triple sma to fit the bn220 / tbs m8.2 / or matek m8q-5883
hole for gps measures: 22x20x~5.8mm
thingiverse
free
Flight Controller Soft Mount or FC softmount by CesiumSalami
...t. if you have a usb or other hardware that needs a little space the one with tall "standoffs" might be better for you.
thingiverse
free
2020 Dumpster Fire Ornament - Thin by CesiumSalami
...t i'm not sure how if stiffer filaments would need to be filed or downsized to fit. step file included if that's helpful.
thingiverse
free
StretchBee by CesiumSalami
...theory ... i haven't tested it.
*"345stretch.stl" - is the original one that i posted (as shown in the cad mockup).
thingiverse
free
Sideswipe - 11xx Brushless Frame by CesiumSalami
...ttps://armattanproductions.com/pages/product_details/13261
top 1.5mm: https://armattanproductions.com/pages/product_details/13260
thingiverse
free
QAV-X Realacc x210 Gopro Session mount Easy Mode by CesiumSalami
... need to file down the camera guard (the camera guard pictured above is in this thing: https://www.thingiverse.com/thing:2054283)
Floss
3d_export
$14
Floss Aim Black MOdern Chandelier
...floss aim black modern chandelier
3dexport
floss aim black modern chandelier
3d_export
$30
Touthbrush and Dental Floss 3D Model
...rush dental dentist teeth hygenics hygene floss oralb oral-b tube
touthbrush and dental floss 3d model ethereal 3d 13458 3dexport
cg_studio
$45
Candy floss3d model
...candy floss3d model
cgstudio
.max - candy floss 3d model, royalty free license available, instant download after purchase.
3d_export
$12
dental floss pick with flat thread and wide bow
...pacity / normal (opengl) / roughnes<br>- 3ds max - pbr textures 4k .png /diffuse / glossiness / specular / normal (directx)
archive3d
free
Torchere 3D Model
...floor lamp standard lamp torchere arco floor lamp by floss n300814 - 3d model (*.gsm+*.3ds+*.max) for interior 3d...
3d_export
$5
guitar
...parts to the lid choose string (i used dental floss and then put the lid...
thingiverse
free
Flossing ring
...on to my fingers. this is a basic 20mm ring with an outward edge to hold the floss with your thumb. first try, will update later.
thingiverse
free
Reusable Floss Pick by andrew987
...reusable floss pick by andrew987
thingiverse
reusable floss pick. just add floss!
free3d
free
Pack Of Floss v1
...pack of floss v1
free3d
pack of floss v1 printable, low poly model.
thingiverse
free
Floss Bobbin by mraiser
...floss bobbin by mraiser
thingiverse
in case you or someone in your life needs bobbins for their floss.
Analog
turbosquid
$1
Analog scape
... free 3d model analog scape for download as 3ds, max, and fbx on turbosquid: 3d models for games, architecture, videos. (1315807)
turbosquid
$25
Analog Durometer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
playstation analog
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$7
Analog Wall Clock
...analog wall clock
designconnected
hay analog wall clock computer generated 3d model. designed by schneck, shane.
turbosquid
free
Vossen rim analog
... 3d model vossen rim analog for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1706126)
turbosquid
$7
Old analog multimeter
...analog multimeter for download as 3ds, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1365964)
3d_export
$10
Analog Synthesizer 3D Model
... model
3dexport
keyboard moog synth retro vintage electronic techno music
analog synthesizer 3d model nillervision 59956 3dexport
cg_studio
$29
Analog Chess Timer3d model
...del
cgstudio
.obj .lwo .max .3ds - analog chess timer 3d model, royalty free license available, instant download after purchase.
turbosquid
$10
Dining Table Analog Set
...ritz hansen analog set for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1596537)
turbosquid
$24
Analog Cassette Audio Tape
...ssette audio tape for download as 3ds, max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1495255)
Command
turbosquid
$10
Commander
...
turbosquid
royalty free 3d model commander for download as on turbosquid: 3d models for games, architecture, videos. (1256307)
3d_export
$13
command knife
...command knife
3dexport
command knife
turbosquid
$10
Command
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$140
Command vehicle A
...
royalty free 3d model command vehicle a for download as max on turbosquid: 3d models for games, architecture, videos. (1662822)
turbosquid
$60
Tech Commander
...uid
royalty free 3d model tech commander for download as fbx on turbosquid: 3d models for games, architecture, videos. (1209942)
turbosquid
$49
Commander C40
...yalty free 3d model commander c40 for download as 3ds and 3dm on turbosquid: 3d models for games, architecture, videos. (1283262)
turbosquid
$9
Commanding Mallet
...d model commanding mallet for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1448575)
turbosquid
$100
command exc
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$99
Command Vehicle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
ship commander
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Remix
turbosquid
$5
MODA Collection Remix Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$12
remix yamaha rm1x
...remix yamaha rm1x
3dexport
geometry triangles 15.2k vertices 7.6k pbr no textures 1 materials 1 uv layers yes
3d_ocean
$5
Vray fabric Kvadrat remix green - tileable
...th vray and 3dsmax. high-resolution texture images (2000×2000 px) file included: shader vray 2.40 texture image 3ds max 2011 file
turbosquid
$20
Gerrit Rietveld 1938 Zig Zag Chair Remix
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
multicolored remix parametric table furniture
... fbx, obj, mtl, archive with textures. the model has no glitches. render and materials - vray . without using plugins. good use!
3ddd
$1
Barovier&Toso / Manhattan Remix 7192
... 004293-142405
в коллекции есть люстры 7, 9, 12 рожковые. диаметр соответственный 1000, 1250, 1500 мм.
3ddd
$1
Muuto fiber chair
...grey/grey, dusty green/dusty green, nature/oak, natural white/oak upholstery options remix 183/black, remix 133/grey, remix 643/dusty red leather options black...
3ddd
$1
Barovier&Toso 7190-7195
...7190-7195 3ddd barovier&toso потолочнай люстра фабрики barovier&toso;, коллекция manhattan remix артикул 7190-7195. размеры в inches: 39"...
3d_export
$5
3D Locking Handle Weatherproof Storage Box Container
...handle weatherproof storage box container 3dexport new, improved and remixd! no screws required. print-in-place. weatherproof. parametric. 2 parts. easy...
cg_studio
$49
HTC One Mini 2 Amber Gold3d model
...cell phone mobile cellular super lcd touchscreen touch screen remix amber gold .max .obj .mb .lwo .fbx .c4d .3ds...
Center
archibase_planet
free
Center
...center
archibase planet
cabinet desk office furniture
l-center - 3d model for interior 3d visualization.
3d_ocean
$9
Cultural center
...cultural center
3docean
academy architects building center cultural exteriors
cultural center academy
3ddd
$1
play center
...play center
3ddd
площадка
play center
3ddd
$1
kids center
...kids center
3ddd
площадка
kids center
3ddd
free
kids center
...kids center
3ddd
площадка
kids center
3d_export
$30
shopping center
...shopping center
3dexport
shopping center model with textures.
3d_export
$5
center table
...center table
3dexport
the center table for interior with texture and light
3d_export
$10
television center
...television center
3dexport
this is entertainment center for television and and other things you can put it.
3d_ocean
$5
Center table
...center table
3docean
center table main file are dxf, obj, 3ds max with maps.
3d_export
$7
business center
...business center
3dexport