Flooring Spacer by MeditatedStone0

...g laminated flooring. by rice9300 thingiverse floor spacer for installing laminated flooring to set correct distance from walls.

...cleaning spacer by makers972official thingiverse floor spacer for everything

...ure that your installation maintains the expansion gap between the floor and your wall as required by your flooring manufacturer.

...e spacer at 90 degrees if you find you need more room at a corner. openscad file included so you can tweak the sizes if you want.

...ne and stays in place, simply grout over. if you want to remove them and leveling isn't needed place them on top as pictured.

...r set by cbiker thingiverse 1 1/8" spacer set und 7mm aero spacer passend fuer pro vibe vorbau und cannondale 25mm top cap.

...1/4" spacer by yautay thingiverse 1/4" spacer for openbuilds projects.

...speedplay cleat spacer 1/2/3mm thingiverse speedplay cleat spacer. 1/2/3mm

...tion spacer with 1/8 and 1/4 spacers. ruler at one end for alternate use. this was made for a friend and now is for all to share.

...1/2in receptacle spacer by junkmanii thingiverse 1/2in receptacle spacer for 3x2in gang box.(says 2in is really 1/2in)

...flooring by wonderbread09 thingiverse flooring

...floor by akallabeth thingiverse floor for howa

...g laminated flooring. by rice9300 thingiverse floor spacer for installing laminated flooring to set correct distance from walls.

...door floor guide thingiverse door floor guide

...floor slab by vifzack thingiverse this floor slab is for a cable channel.

...in floor thingiverse used to cover holes in laminate flooring ...

...floor pattern by hintss thingiverse i found this pattern on a floor once.

...stone floor thingiverse for gaming and modeling

...floor lamp by ayanev thingiverse stand for floor lamp, 27x27mm wood used.

...cers diametre_inter=1.9; // diameter of hole of spacers for screw always add 0.4mm //example for 3mm diameter 1.5 + 0.4mm = 1.9mm

...spacer by grafis thingiverse spacer

...spacer by airsoftedward thingiverse spacer

...spacer by jrwolfe thingiverse spacer

...sign spacer thingiverse sign spacer

...spacer by error404robotics_2336 thingiverse a small spacer

...monitor spacer thingiverse spacer for monitor rod

...spring spacer thingiverse spacer to add spring tension

...spacer by franz2108 thingiverse spacer by franz [created on 3dtin]

...plastic spacer thingiverse plastic bushing/spacer for paper shredder.